라즈베리 파이용 멀티미디어 확장 쉴드 x400 -사운드
(Expansion Shield x400 for Raspberry Pi B+/2B/3B)
개요
- 본 제품은 라즈베리 파이용 사운드 HAT 입니다.
- 라즈베리 파이 모델 B+, 파이 2, 파이 3 모델 B와 호환되며, I2S 인터페이스 오디오 솔루션을 이용하여 24비트/192Khz 고품질 사운드를 지원합니다.
- RCA lotus 소켓을 이용하여 다른 오디오 장치와 연결이 가능합니다.
- 헤드폰 앰프를 탑재하고 있어 3.5mm 오디오 잭을 직접 꼽아 사용이 가능합니다.
- 보드에는 두개의 디지털 앰프 출력을 가지고 있어 2x30W 스피커를 직접 연결하여 사용이 가능합니다.
-
Note: Raspberry Pi is not included in the box.
특징
- Input Voltage
- 6V to 24V DC converted to 5V, 3A via step-down DC/DC converter to power the Raspberry Pi
- Audio
- Full-HD audio
- up to 24-bit/192kHz playback
- Class leading audio; 112db SNR, and THD of 0.0019%
- Audiophile TI Burr Brown 32-bit/384kHz DAC (TI PCM5122)
- Uses the digital I2S audio signals to reduce CPU load over USB audio solutions
- Integrated hardware volume control - Mute can be enabled / disabled via jumper
- Built in High quality audio headphone amplifier (TI TPA6133A)
- Earphone AMP can be enabled / disabled via jumper
- Built in high quality Class-D stereo audio amplifier (TI TPA3118D2)
- Up to 2 x 20W into 4 ohm
- AMP can be enabled/disabled via jumper
- Phono/RCA connectors
- 3.5mm stereo audio jack
- Speaker terminals
- Wireless
- Built in IR sensor (38KHz)
- Misc
- Power output socket
- DIP switch to remove connection from RPi's pin header
- Directly connected on top of the Raspberry Pi using the board GPIO header pins
- No wiring or soldering is required
- Pin mappings identical to 40-pin header of the R-Pi in order to support existing expansion boards
- Suitable for Raspberry Pi Model B+, 2 Model B and 3 Model B
- Dimensions
- 85 x 56mm (Same footprint as Raspberry Pi)
- SHIPPING LIST
- X400 Expansion Board x1
- Nylon Spacers (M3 x 20mm) x4
- Nylon Screws (M3 x 6mm) x8
- Jumper Wires x2
문서
연관제품
- 연관제품 1