수량을 선택해주세요.
MSB-RS232 RS232 프로코콜 분석기
(IFTOOLS MSB-RS232 RS232 Analyser)
개요
- 본 제품은 MSB-RS232 RS232 프로토콜 분석기입니다.
- RS232 연결을 최적화하고 분석하기 위한 툴입니다.
- 독립적으로 정확한 정보를 수집할 수 있으며, 마이크로 세컨드의 분해능을 가지고 있습니다.
- 또한 Multiview 컨셉을 가진 Visualization tool이 있어 각각의 RS232 통신에 대해 시간별로, 다른 포맷별로, 다른 시간 분해능 별로 자세한 내용을 살펴볼 수 있으며, 관련 조건을 검출할 수 있습니다.
- 이런 view는 signal view, data view, event view, protocol view 가 있습니다.
- RS232 장치를 연결후 PC의 USB 포트에 분석기를 연결하여 바로 사용하여 보십시오.
- 본 제품은 RS232를 디버깅, 레코딩, 테스트 및 리버스 엔지니어링 할 수 있는 모든 기능을 제공합니다.
특징
- Software Feature Screen Shot
- Features & Benefits
- Analyzer for recording and analysis of 8 RS232 lines TXD, RXD, CTS, RTS, DTR, DSR, DCD, RI.
- Sampling rate up to 16 MHz for exact measurement and analysis of the time relationship of all signals with a resolution of 1 microsecond.
- Automatical detection of any baudrate from 1 to 1MBaud and data format (used data bits, parity).
- Supports protocols with 9 bit data length.
- High-precise setting and measuring of any baud rate up from 1 Baud up to 1 MBaud with 0,1% precision
- Parameter for RXD,TXD: 5 to 9 data bits; Parity off, even, odd, fixed 0, fixed 1
- All line change events 1µs exactly, hardware based, OS independent.
- Detection of the logical states 1 (V-), 0 (V+), Invalid (-1.3V < In < +1.3V)
- signal level: Standard RS232 Levels ±3V to ±15 V, ESD protected inputs 5kOhm
- Standard D-Sub 9pin connectors, male and female.
- Connection between port A and port B through high speed RS232 buffer, each switchable
- All RS232 inputs adjustable as logical inputs with trigger level 1.3V, 5kOhm.
- Recording:
- The analyzer marks every event (data byte, signal alternation) with a time stamp in microsecond resolution (independent of the PC) and send the information via USB to the connected PC where it is stored in a special file.
- Real time analysing and simultaneous access/display of different record parts even during an active recording.
- 4 GByte max. record file size on PC for real time analysing. Unlimited (or free hard disk space) records when using the special command line API for long time recordings.
- The record time depends on the selected kind of events and data rate of the connection.
- Protocol
- Includes predefined protocol templates for Modbus ASCII, Modbus RTU, Profibus, 9-Bit (MultiDrop like protocols), SRecord and more...
- Write your own: Equipped with a Lua script engine the Analyzer is able to parse almost all thinkable RS232 and RS485 fieldbus protocols and format and summarize the telegram output in an extremely wide range.
- 512 kByte internal cache memory buffers high data volumes.
- Four leds for indication. RED: recording status, buffer loading, GREEN: RXD and TXD data flow
- No additional power supply needed. Supply via the USB Connector, about 200mA (USB ground same as connection port ground).
- 100mm x 50mm x 25mm (Length, width, Height)
- About 100g
- Hareware requirement
- A graphic display with minimum 1024x768 resolution and 16 Bit colour or better recommended.
- 100 MByte free hard disk space for installation, additional space depending on further record files.
- 256 MByte RAM or more
- A free USB 1.1 Port or 2.0 Port (full speed).
- Supported OS
- Windows XP, Vista, Windows 7, Windows 8, all version with 32 and 64 bit.
- All Linux with kernel 2.4.18 or higher, GLIBC 2.4 or higher and installed Gtk2 libs, 32 and 64 bit systems. (If unsure, please try to install/run the linux version on the download page).
- Shipping List
- MSB-RS232 Analyzer
- RS232 Cable, 2m, 1:1, 9Pol DSub-Connectors male to female, USB Cable
- CD with installer
문서
- manual
- datasheet
- For a more detailed description of the analyzers advantages and capabilities read the following article
- software download
