ArduIMU+ V3 IMU 솔루션
(DIYDrones ArduIMU+ V3)
개요
- ArduIMU+ V3는 DIYDrone사의 가장 최신 버전의 IMU 솔루션입니다.
- Invensense MPU-6000 MEMS 3축 자이로/가속도 센서와 3축 I2C 자기계센서 HMC-5883L를 결합한 제품으로 작고 빠른 제품입니다.
- GPS 포트와 Atmega328 마이크로컨트롤러를 장착하고 있는 작지만 강력한 IMU 솔루션입니다.
- 본 제품은 버전2와 핀이 호환되지만 V2에 비해 브레드보드에서 사용하기 편리합니다.
- 본 제품은 로켓어플리케이션에서부터 단순한 움직임 검출 어플리케이션까지 사용이 적합합니다.
- Dimensions: 1.5" x 1.0"
특징
- 3-Axis gyro with sensitivity up to 131 LSBs/dps and a full-scale range of ±250, ±500, ±1000, and ±2000dps
- 3-Axis accelerometer with a programmable full scale range of ±2g, ±4g, ±8g and ±16g
- Reduced settling effects and sensor drift by elimination of board-level cross-axis alignment errors between accelerometers and gyroscopes
- Full Chip Idle Mode Supply Current: 5µA
- On-chip timing generator with ±1% frequency variation over full temperature range
- User self test
- 10,000g shock tolerant
- Pin compatible with ArduIMU V2
- The 6 analog pins are now available!
- Arduino compatible and open source.
- 3 status LED's (RGB).
- I2C port with 3.3V translation.
- GPS port with FTDI autoswitch.
문서
- Schematic
- Eagle Files
- Google Code Page
- Datasheet (MPU-6000)
- Datasheet (HMC5883L)
- Datasheet (Atmega328)
연관제품
- 연관제품 1