1-Wire 서모커플 앰프 MAX31850K 모듈
(Thermocouple Amplifier
with 1-Wire Breakout Board
- MAX31850K)
개요
- 써모커플은 매우 예민하여 보정 리퍼런스가 있는 좋은 앰프가 필요합니다.
- 저희가 판매하는 MAX31855는 SPI인터페이스를 가진 매우 좋은 써모커플 앰프이지만 여러개의 써모커플을 같이 사용하고하 할 경우에는 사용이 쉽지가 않습니다.
- 본 MAX31850 써모커플의 경우 1-Wire 써모커플 앰프로 한개의 I/O라인에 여러개의 모듈을 가질수 있어, 이러한 경우 사용이 편리합니다.
- MAX31850K는 1-Wire 프로토콜을 이용하여 1-Wire 를 지원하는 마이크로컨트롤러와 쉽게 연결할 수 있습니다.
- 모듈에는 10uF 바이패스 캐패시터를 가진 3.3V 레귤레이터를 가지고 있습니다.
- Vin 핀에 전원을 주어 동작시키거나 parasitic power(the power is on the data line)으로 사용이 가능합니다.
- 알림: 본 모듈의 3V 데이터 라인에는 parasitic power mode를 위해 레벨 쉬프트 회로가 없습니다. 데이터 라인은 반드시 3V 레벨을 사용하여야 합니다.
- 알림: 여러개의 써모커플을 사용시 공유된 데이터 라인에는 한개의 1-wire host만 존재하여야 합니다.
- MAX31850K의 데이터 포맷은 잘 알려진 1-Wire DS18B20 온도센서와 매우 유사하지만 코드 변경 없이 DS18B20 코드를 바로 사용할 수 없습니다. 제품 사용을 위해 다음의 라이브러리를 참고하십시오. OneWire and DallasTemp libraries
-
특징
- Dimensions (without headers):20mm x 20mm
- Works with any K type thermocouple
- Will not work with any other kind of thermocouple other than K type
- -270°C to +1370°C output in 0.25 degree increments
- Internal temperature reading
- 3.3 to 5v power supply. Data line is 3V only
- 1-Wire interface allows any number of thermocouple amps on a single data line
- Comes with a 2 pin terminal block (for connecting to the thermocouple), 4.7K data line pullup resistor, and pin header