MQ-2 가스센서 모듈 -연기, 메탄, 부탄
(MQ-2 Gas Sensor Module
-Smoke, Methane, Butane Detection)
개요
- MQ-2 가스센서 모듈입니다. 연소 가능한 다양한 가스를 검출하는 센서로 연기, 부탄, 메탄 등을 검출합니다.
- 모듈에는 전원을 표시하는 LED가 장착되어 있으며, DO(TTL) 출력 및 아날로그 출력 AO를 가지고 있습니다.
- 검출되는 가스의 농도가 높을 수로 아날로그 출력 전압이 높아집니다.
- 4개의 마운팅 홀이 있어 쉽게 모듈을 고정할 수 있습니다.
특징
- Product dimensions: 32 x 20 x 15 (L x W x H)
- Chip: LM393, ZYMQ-2 gas sensors
- Working voltage: DC 5V
- Detection of gas: combustible gases, fumes
- Detectable concentration: 300-10000ppm (flammable gas)
- Input voltage: DC5V
- Power consumption (current): 150mA
- DO output: TTL digital 0 and 1 (0.1 and 5V)
- AO output: 0.1 - 0.3V (relative to pollution), the maximum concentration of a voltage of about 4V
- Special note: after the sensor is powered , needs to warm up around 20S, measured data was stable , heat sensor is a normal phenomenon , because the internal heating wire , if hot is not normal .
문서
- MQ 가스센서 가스별 탐지 모델
- Wiring
- 1, VCC: positive power supply (5V)
- 2, GND: power supply is negative
- 3, DO: TTL switching signal output
- 4, AO: analog signal output
-
void setup() { Serial.begin(9600); } void loop() { float vol; int sensorValue = analogRead(A0); vol=(float)sensorValue/1024*5.0; Serial.println(vol,1); }
연관제품
- 연관제품 1