HC-05 블루투스 시리얼 모듈
(HC-05 Bluetooth Serial Module)
개요
- 본 제품은 HC-05 블루투스 모듈로 블루투스를 이용하여 무선으로 시리얼 통신을 할 수 있게 하는 제품입니다.
- 짧은 거리에서 무선 통신을 하고자 할때 사용할 수 있습니다.
- 마스터 혹은 슬레이브로 설정이 가능하며, 마이크로컨트롤러와 4개의 선(RX/TX/VCC/GND)으로 연결이 가능합니다.
- 알림: 최근 출고되는 제품은 모듈에 작은 버튼을 장착하고 있습니다. 버튼이 장착된 HC-05는 모듈에 전원인가전에 버튼을 누른 후 VCC에 전원을 인가하면 WAKEUP 핀 제어 없이 AT 명령 모드로 진입합니다.
- 알림: AT명령 송신시 캐리지 리턴이 반드시 들어가야 정상적으로 AT 명령이 전송됩니다.
특징
- Wireless serial Bluetooth port with free extension cable
- Core Modules using HC-05 slave modules,leads from the module interface including VCC, GND, TXD, RXD. Reserve LED output pin status,Single Chip Microcomputer can be judged connected or not by the foot state,KEY pin is invalid for slave.
- LED indicate show connection status,when it is flashing means non-connection, normally on mean it connect successfully
- Backplane set anti-reverse diode with 3.3V LDO, input voltage: 3.6~6V , Unpaired current: about 30 MA, Paired: about 10 MA, input voltage cann't exceed 7V
- Interface level 3.3V, can be directly connected the various SCM (51, AVR, PIC, ARM, MSP430, etc.), the microcontroller can also be directly connected without MAX232
- Effective distance : 10M
- After repaired,can used as full-duplex serial,supports 8 data bits, 1 stop bit, no parity communication format
- Easy to connect this module with any standard Bluetooth device, just search and key "1234" passcode.
- Running in slave role: Pair with BT dongle and master module,Simply establish connection between device with bluetooth function GPS, PC,PDA,PSP phone ,Industrial control,etc.
문서
연관제품
- 연관제품 1