DC모터/스텝/서보 쉴드 -L293D
(DC Motor/Stepper/Servo Shield
-L293D)
개요
- 본 제품은 L293D를 장착한 모터 4개의 DC 모터, 2개의 스텝모터를 동작시킬 수 있는 모터 쉴드입니다.
- 아두이노의 PWM출력과 연결된 두개의 서보 연결용 핀 또한 지원하여, 모터를 이용한 간단한 프로젝트에서 중급의 복잡도를 지닌 프로젝트까지 진행이 가능합니다.
- Adafruit의 라이브러리와 잘 동작합니다.
특징
- 2 connections for 5V 'hobby' servos connected to the Arduino's high-resolution dedicated timer - no jitter!
- 4 H-Bridges: L293D chipset provides 0.6A per bridge (1.2A peak) with thermal shutdown protection, internal kickback protection diodes. Can run motors on 4.5VDC to 25VDC.
- Up to 4 bi-directional DC motors with individual 8-bit speed selection (so, about 0.5% resolution)
- Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil or interleaved stepping.
- Pull down resistors keep motors disabled during power-up
- Big terminal block connectors to easily hook up wires (18-26AWG) and power
- Arduino reset button brought up top
- 2-pin terminal block and jumper to connect external power, for separate logic/motor supplies
- Tested compatible with Arduino Mega 1280 & 2560, Diecimila, Duemilanove, and UNO
- Download the easy-to-use Arduino software library, check out the examples and you're ready to go!
문서
연관제품
- 연관제품 1