라즈베리파이 2 모델B용 확장 쉴드 X200
(Expansion Shield X200 for Raspberry Pi B and 2)
개요
- 본 제품은 라즈베리 파이 2 모델 B 혹은 모델 B+용 확장 쉴드입니다.
- RTC, 오디오 입출력, VGA 출력, USB 허브, WiFi, 8채널 GPIO 등의 매우 유용한 기능을 장착하였습니다.
- 본 쉴드를 이용하면 라즈베리파이 프로젝트를 매우 쉽게 시간과 비용을 절약하여 진행하실 수 있습니다.
- 알림: 라즈베리 파이를 쉴드상의 전원으로 동작시키려고 할때, Micro USB 포트로 다시 전원을 공급하지 마십시오. 보드가 손상될 수 있습니다.
특징
- Input Voltage: 6V to 21Vdc converted to 5V, 3A via step-down DC/DC converter to power the Raspberry Pi
- VGA output: HDMI to VGA converter supporting up to UXGA (1600×1200) and 1080p with 10-bit DAC
- Audio: 3.5mm MIC in jack
- 3.5mm stereo audio jack
- SPDIF output
- Audio IO connector (Microphone input and stereo audio amplifier 3.3Wx2)
- Wireless: WiFi (IEEE 802.11b/g/n) with external antenna
- IR sensor (38KHz)
- USB Storage: Self-powered USB hub with 3 ports
- Real-time clock (RTC): Based on DS3231SN with included CR2032 battery
- GPIO Control: 8-channel Darlington driver chip (ULN2803) allowing to control electronic circuits which require more current
- Misc: Power output socket
- Camera flex slot so camera can still be used with the expansion board attached
- DIP switch to remove connection from RPi's pin header
- Directly connected on top of the Raspberry Pi using the board GPIO header pins
- No wiring nor soldering is required
- Duplicated the 40-pin header of the R-Pi in order to support existing expansion boards
- Suitable for Raspberry Pi Model B+ and Raspberry Pi 2 Model B NEW!
- Dimensions: 85 x 56mm (Same size as Raspberry Pi)
- X200 Raspberry Pi expansion board x1
- HDMI adapter x1
- USB adapter x1
- 2.4GHz WIFI antenna x1
- nylon spacers (M3 x 20mm) x4
- nylon screws (M3 x 6mm) x8
문서
연관제품
- 연관제품 1