US-100 시리얼 초음파 거리 센서 -UART
(US-100 Ultrasonic Distance Sensor - 3V or 5V Logic)
개요
- 본 제품은 US-100 초음파 거리 센서입니다.
- HC-SR04와 비슷하지만 3-5V에서 동작이 가능하여 로직 레벨 변환기가 필요 없으며, Serial UART 모드가 추가되었습니다.
- 뒷면의 점퍼가 제거되면 HC-SR04 처럼 동작하며, 점퍼가 설정되어 있으면 9600 UART 통신을 합니다.
- UART 모드에서는 0x55를 보내면 2 byte (16 bit) 값의 mm 거리정보를 보내줍니다.
- 0x50 명령은 온도를 읽는 명령입니다.
- USB-Serial 컨버터를 연결하여 PC에서도 사용이 가능합니다.
- 2cm에서 450cm까지의 측정범위를 가지지만 10cm-250cm에서 잘 동작합니다.
특징
- Power & Logic Voltage: DC 2.4V~5.5V
- Current: 2mA
- Operating Temperature: -20~ + 70º
- Measuring Angle: Less than 15º
- Detection Distance: 2cm – 450 cm
- Accuracy: 0.3cm +1%
- Sensor dimensions (excluding header): 45 x 20mm
- Weight: 9g
문서
-
In HC-SR04 mode (no jumper), you can use this sensor with Arduino, CircuitPython (for microcontrollers or Raspberry Pi) or MakeCode
In UART mode (jumper placed), you can use this sensor with Arduino or CircuitPython
We carry a large variety of distance sensors here if this fellow isn't what you're looking for.