바이폴라 스텝 모터 드라이버 -TB67S269FTG
(Stepper 4 click)
개요
- 본 제품은 TB67S269FTG 2상 바이폴라 스텝모터 드라이버 모듈입니다.
- 3.3V, 5V로 동작이 가능합니다.
- 모터와 전원을 연결하기 쉽게 스크류터미널 블럭이 장착되어 있으며, 모터의 토크를 조절할 수 있는 포텐셔미터와 스텝 분해능을 선택할수 있는 DIP 스위치가 장착되어 있습니다.
특징
-
TB67S269FTG features
The TB67S269 is a two-phase bipolar stepping motor driver from Toshiba.
Step mode selector
There are several different resolutions a stepper motor can use - a full step, half a step, etc. The driver on this click also allows different resolutions, from a full step to 1/32 of a step.
DMODE0 DMODE1 DDMODE2 Function 0 0 0 Standby mode (the OSCM is disabled and the output stage is set to 'OFF' status) 0 0 1 Full step resolution 0 1 0 Half step resolution (Type(B)) 0 1 1 Quarter step resolution 1 0 0 Half step resolution (Type (B)) 1 0 1 1/8 step resolution 1 1 0 1/16 step resolution 1 1 1 1/32 step resolution Specifications
Type Stepper Applications The click is designed for driving bipolar step motors in full, 1/2, 1/4, 1/8, 1/16, 1/32 step modes On-board modules TB67S269FT CLOCK-in controlled bipolar stepping motor driver, three pairs of screw terminals, potentiometer Interface GPIO Input Voltage 3.3V or 5V Click board size L (57.15 x 25.4 mm) Pinout diagram
This table shows how the pinout on Stepper 4 click corresponds to the pinout on the mikroBUS™ socket (the latter shown in the two middle columns).
Jumpers and settings
Designator Name Default Position Default Option Description VCC SEL VCC SEL Left 3V3 Power supply selection, left position 3V3, right position 5V INT SEL INT SEL Left MO Interrupt pin selection, left position MO, right position LO
문서
연관제품
- 연관제품 1