파이 제로용 ENC28J60 이더넷 네트워크 아답터 보드
(ENC28J60 OVERLAYS HAT for Raspberry pi)
개요
- 본 제품은 라즈베리 파이 제로용 ENC28J60 이더넷 네트워크 아답터 보드입니다.
- 쉽게 셋업하여 사용이 가능합니다.
특징
-
Technical Details
Easy to assemble
Easy to setup
Official OS overlay support
Stable and fast
How to configure it
1. Install the NIC module into the raspberry Pi.
2. Connect the network cable to ensure that your router supports DHCP and works well.
3.Burn the Raspbian image to TF card.
4. Edit the /boot/config.txt file by your favorite editor such as"nano"or"vim.tiny", and add the following parameter:
1dtoverlay=enc28j60Then save the exit and reboot the raspberry Pi.
NOTE The module is tested only in raspbian environments. -
Technical Details
Dimensions 65.5mm x 30mm x 23.5mm Weight G.W 15g Battery Exclude Part List
Pi zero Enc28j60 Network Adapter Module 1 Instruction 1