IOS several important points, want customers to use the module before, look at this document! Keep in mind.

(For Apple above 4s 5 5s machine)
USE in IOS:

1.IOS search for Bluetooth  (You can only connect a Bluetooth headset in IOS settings. Unable to find a wireless data device)

2.Search LightBlue software from appstore, and then open the software to search HM-10, matching and test to send, receive!

---------------------------------------------

Android phones
1. Make sure the Android mobile phone hardware Bluetooth module supports Bluetooth 4.0. (if your phone hardware module does not support it, the module will not connect successful)

2. The system upgrade to 4.3 or later

3. HMBLEComAssistant.rar in the package can be used to test the transceiver

------------------------------------------------

PS: Development of IOS or Android mobile terminals. Visit http://www.jnhuamao.cn/download.asp?ID=0 to download the latest source code, make reference!


-------------- HM-10 module configuration, you need a USB to TTL devices. Not configured wireless pairing! (Because the wireless pairing data directly through pass) ----------

1. In the case of remote device is not paired and connected, LED slow blinking, can use AT command module configuration.

2. HM-10 module can only identify all uppercase AT command, does not support lowercase and mixed-case writing.


3. The factory default baud rate is 9600 8n1


Slave settings


AT + BAUD0 // 9600 after setting To power restart to take effect

AT + NAMEAC

AT + PASS000000 // must enter the full 6 number

AT + TYPE1

AT + ROLE0



Host settings:

AT + BAUD0 // 9600 after setting To power restart to take effect

AT + NAMEAC

AT + PASS000000 // must enter the full 6 number

AT + TYPE1

AT + ROLE1