RS485 서비스 툴키트 플러스 -RS485 분석/점검/수리
(IFTOOLS RS485 Service Kit PLUS)
개요
- 본 제품은 RS422/RS485 어플리케이션을 분석하는데 필요한 툴을 모아 놓은 제품입니다.
- USB-RS422/485 컨버터와 CleverTerm 터미널 프로그램을 이용하여 telegram을 시뮬레이션하고, 데이터 시퀸스를 전송할 수 있으며, MSB-RS485 분석기를 통해 request나 response가 올바른지 검증하고, 가능한 에러를 찾는데 사용할 수 있습니다.
특징
-
MSB-RS485-PLUS Analyzer Baud Rates Any baud rate between 1Baud...20 MBaud Data Format 5...9 Data bits, none, even, odd, mark, space parity, any stop bits Logical Linestates Detection and display of logical linestates:
1 (V+), 0 (V-), invalid (-1.3V < IN < +1.3VTime resolution 10ns for all line change events (hardware based, OS independent) Signal input RS485 standard level, ±7V to ±12V, ESD protected inputs 5kΩ Bus connectors 2 Phoenix MC 1.5/6ST-3.81 with 2mm screw terminals, 6 pins each, type Phoenix MC156ST381. All connectors are linked through high speed and via software switchable RS485 buffers Auxiliary IOs Two additional terminals individual switchable as input (0-5V, trigger level 1.65V, 10kΩ pull up or down) or output (0/5V, ca. 50mA) Operation The analyzer marks every event (data byte, signal alternation) with a time stamp in 1µs resolution (independent of the PC) and send the information via USB to the connected PC Featuring Real time analysing and simultaneous access/display of different record parts even during an active recording Capacity 4GByte max. record file size on PC for real time analysing. Unlimited (or free hard disk space) records when using the special command line API for long time recordings Record time The record time depends on the selected kind of events and data rate of the connection Supported Protocols 3964(R), BACNet, DF1, DNP3, IEC60870, MDB, Modbus (ASCII + RTU), P-NET, Profibus, SAE-J1587, SAE-J1922, SRecord, USS, 9-Bit. Individual protocols Adaption of any protocol and telegram display with own protocol templates written in Lua ISO485-Box Isolation High isolating strength 2000Vdc 1sec, 250Vpk working Voltage Data rates 300...3000000 Baud, also non-standard rates Handshake Feed back of the signals RTS/CTS and DTR/DSR in input and output for protocol simulation Protocols 7 or 8 Data bits, 1 or 2 stop bits and None, Odd, Even, Mark, Space Parity RS422/485 Signals TxD, RxD according to the RS485 Standard, ±15kV ESD Chipset FTDI FT232RL: Additional functions for high transmission safety, internal data buffer 384 bytes in both directions, unique USB serial number Plastic case Material Polypropylen (PP) Dimension 255mm x 210mm x 48mm Weight ca. 640g with content - Package Content
-
1 x Practical storage case
-
1 x MSB-RS485-PLUS analyzer
-
1 x Standard USB cable to connect analyzer with PC
-
1 x USB to RS422/485 converter ISO485-Box
-
1 x Standard USB cable to connect ISO485-Box with PC
-
4 x 6-pin Phoenix screw connectors
-
1 x Suitable screw driver
-
1 x CDROM with Software (Windows + Linux), 300-page manual (PDF), drivers and additional tools
-