전체상품목록 바로가기

본문 바로가기

오늘하루 열지않기

전체상품목록 바로가기

본문 바로가기


 
이전 제품 보기 다음 제품 보기
추천메일 보내기 상품조르기 대량구매문의

GNSS RTK 로버 모듈 -LG69TAMMD (RTK ROVER CLICK) (해외배송 가능상품)

기본 정보
판매가(VAT별도) 315,960원
상품코드 P000BFGO
수량 수량증가수량감소
상품요약정보 GNSS RTK 로버 모듈 -LG69TAMMD 입니다.
색상 옵션
SNS 상품홍보
SNS 상품홍보

개인결제창을 통한 결제 시 네이버 마일리지 적립 및 사용이 가능합니다.

상품 옵션

(최소주문수량 1개 이상 / 최대주문수량 0개 이하)

수량을 선택해주세요.

위 옵션선택 박스를 선택하시면 아래에 상품이 추가됩니다.

상품 목록
상품명 상품수 가격
GNSS RTK 로버 모듈 -LG69TAMMD (RTK ROVER CLICK) 수량증가 수량감소 (  )
총 상품금액(수량) : 0 (0개)
바로구매하기 장바구니 담기 SOLD OUT 관심상품등록

재고안내

  • 상품의 실시간 재고는 네이버 페이 버튼 옆 상담 톡톡 버튼 으로 문의 주시면 더 빠르게 답변이 가능합니다

  • 품목이 많으실 경우는 견적서 출력 후 견적서 출력하신 분의 성함을 알려주시면 빠른 답변이 가능합니다

 

회원가입안내

  • 1. 회원가입 후 무통장 결제시

    할인 쿠폰의 사용이 가능
  • 2. 문의 게시판을 통한 기술지원

  • 3. 신규회원 가입시 2,00원 적립

  • 4. 주문/배송 내역 SMS 발송

회원가입

이벤트

GNSS RTK 로버 모듈 -LG69TAMMD

(RTK ROVER CLICK)

IMG_0242

개요

  • 본 제품은 GNSS RTK 로버 모듈 -LG69TAMMD 입니다.
  • 호환되는 RTK Base station에서 정확한 위치 데이터를 보강하는 애드온 보드입니다.
  • Quectel's LG69TAMMD GNSS 모듈을 기반으로 디자인된 제품으로 센티미터 수준의 측정데이터를 보여줍니다.
  • GPS/QZSS, Galileo, BDS 세개의 위성신호 (NMEA 0183/RTCM 3.x protocol)를 지원합니다.
  • UART 인터페이스를 가지고 있으며, 드론이나 이동 차량과 같은 위치/속도/시간 어플리케이션에 사용이 가능합니다.
  • 알림: LG69TAMMD은 RTK Base station 데이터를 사용하여 RTK 기능을 Rover로써 지원합니다. 호환되는 RTK Base station은 다음 링크를 참고하십시요.

특징

  • RTK Rover Click is based on the LG69TAMMD, a multi-constellation GNSS module featuring a high-performance and high-reliability positioning engine from Quectel Wireless Solutions, that facilitates a fast and precise GNSS positioning capability. The LG69TAMMD has a dual-band supporting up to three concurrent global constellations featuring STMicroelectronics®' fifth generation positioning receiver platform with 80 tracking and four fast acquisition channels. It is characterized by a horizontal position accuracy of 1m autonomous (24h static) and 0.01m+1ppm RTK with a high performance YB0017AA mobile antenna in an open-sky environment and within 1km of the base station.

    The primary function of the LG69TAMMD is PVT (RTK) which stands for Position, Velocity, and Time. Designed according to the IATF 16949:2016 standard, the LG69TAMMD comes with GPS+BDS+Galileo as a default GNSS constellation and an integrated LNA for improved sensitivity. It can receive and track GPS L1 C/A and L5 and Galileo E1 and E5a signals centered at 1575.42MHz and 1176.45MHz, and BeiDou B1I and B2a signals centered at 1561.098MHz and 1176.45MHz. The ability to receive and track BeiDou signals in conjunction with GPS results in higher coverage, improved reliability, and better accuracy.

    RTK Rover Click communicates with an MCU using the UART interface, with commonly-used RX and TX pins alongside one data-ready pin (INT), which informs the host MCU to receive data when the buffer transmission is full. It is also equipped with a USB type C connector, which allows the module to be powered and configured by a personal computer (PC) using FT2232D, a compact USB to a serial UART interface device designed to operate efficiently with USB host controllers.

    Before supporting the RTK navigation technique, this module must receive the RTK correction messages via its UART port. In a default configuration, it will attempt to achieve the best positioning accuracy based on the correction data it receives. When the module receives an input stream of RTCM messages, it will enter RTK float mode, and once it fixes carrier phase ambiguities, it enters RTK fixed mode. It will typically take less than 60 seconds before the Rover can solve the carrier ambiguities and go from RTK float to RTK fixed mode.

    In addition to the interface pins, this board uses a few additional mikroBUS™ pins. An active-low reset signal alongside an onboard RESET button, routed on the RST pin of the mikroBUS™ socket, performs a reset function of the module, WUP pin performs module wake-up, and the SHD pin routed on the AN pin of the mikroBUS™ socket offers a switch operation to turn ON/OFF the power supply to the LG69TAMMD. The module can use Boot Download Mode for firmware update via the BT pin routed on the RST pin of the mikroBUS™ socket, alongside a blue LED indicator marked as PPS for time pulse signal information and indication. The module enters Normal operating mode by keeping the BT pin on a low logic state during the Startup sequence. Otherwise, the module enters Boot Download Mode when the pin is high during Startup.

    A specific addition to this Click board™ is several testpoints that enable the use of additional module features such as RTK positioning status indicator, Wheel tick pulse signal sampled from the wheel revolution sensors, or correction UART by default or NMEA output/raw data output.

    This Click board™ can operate with both 3.3V and 5V MCUs. As its main power supply, the LG69TAMMD uses 3.3V obtained from the MCP1826 LDO but also has the possibility of using an additional backup power supply in the form of a coin-shaped battery. The board must perform appropriate logic voltage level conversion before using MCUs with different logic levels. However, the Click board™ comes equipped with a library containing functions and an example code that can be used as a reference for further development.

    RTK TECHNOLOGY

    The Global Navigation Satellite System (GNSS) is a widely deployed and accepted means of determining precise locations without the need for the coverage or signal strength of cellular networks. GNSS combined with RTK is a solution that can realize precise real-time positioning, with positional down to the centimeter level. Quectel's ultra-compact, low-power GNSS modules, such as LG69T-AS and LG69T-AM, provided in the form of RTK Click boards™, cover the full range of requirements for high precision, dead reckoning and timing for applications as diverse as ADAS and self-driving, crewless flight, and smart agriculture.

    In addition to the software support that Mikroe provides for this Click board™ in the form of libraries, functions, or example code, there is also software support provided by Quectel. Quectel's QGNSS evaluation software equips end users with an easy way to interface to Quectel GNSS modules or boards, enabling easy evaluation, testing, development and debugging of GNSS.

    For all additional support questions, the customers can submit a ticket to our Technical Support or Design Service Department page.

    SPECIFICATIONS

    Type GPS/GNSS
    Applications Can be used for PVT (Position, Velocity, and Time) applications such as drones, delivery robots, precision agriculture, mining/marine management, and automotive telematics
    On-board modules LG69TAMMD - multi-constellation GNSS module from Quectel Wireless Solutions
    Key Features Dual band, centimeter-level accuracy, 80 tracking channels and 4 fast acquisition channels, high-performance, high-reliability, supports up to 3 concurrent global constellations (GPS/QZSS, Galileo, and BDS), NMEA 0183/RTCM 3.x protocol, UART and USB interface, PPS indicator, and more
    Interface UART,USB
    Compatibility mikroBUS
    Click board size L (57.15 x 25.4 mm)
    Input Voltage 3.3V,5V

문서

연관제품

상품결제정보

결제는 신용카드, 실시간 계좌이체, 무통장 입금 등을 선택하여 진행하실 수 있습니다. 세금계산서 발행을 요청하실 경우에는 결제방법을 무통장 입금으로 선택하시고 사업자등록증 사본을 cs@vctec.co.kr으로 보내주셔야 합니다.

배송정보

  • 배송 방법 : 택배
  • 배송 지역 : 전국지역
  • 배송 비용 : 3,500원
  • 배송 기간 : 1일 ~ 10일
  • 배송 안내 : - 산간벽지나 도서지방은 별도의 추가금액을 지불하실 수 있습니다.
    - 상품종류에 따라서 상품의 배송이 다소 지연될 수 있습니다.
    - 구매 총액이 10만원 미만의 주문 경우는 택배발송시에는 배송비 3,500원이 추가됩니다.
    - 구매 총액 10만원 미만 주문의 퀵발송 및 급행처리 요청시 핸들링 비용 3,500원이 추가 됩니다.
    - 매장이 아니므로 방문구매 및 수령이 불가능 합니다.
    - 영업일 기준 2일 이내 미출고 물품은 해외 수입 제품입니다.
    - 높은 전압과 전류를 사용하는 제품은 사용 전 안전에 유의 바랍니다.
    - 제품을 교육수준으로 설명하거나 사용자 프로젝트에 대한 컨설팅이나 기술지원을 하지 않사오니 참고부탁 드립니다.

교환 및 반품정보

교환 및 반품안내
- 상품을 공급 받으신 날로부터 7일이내에 교환 및 반품이 가능하며,
- 미개봉/미설치 제품인 경우이거나 불량제품인 경우에 한해 가능합니다.

- 교환/반품시 승인 없이 제품을 먼저 발송시 왕복 택배비가 발생합니다.
- 상품가치가 훼손되어 재판매가 불가능 할 경우는 교환/반품이  불가능합니다.
- 소프트웨어는 개봉시 교환/반품이 불가능합니다.

- 주문수입제품의 경우는 환불/교환이 불가능합니다.

- 수입제품의 경우는 수리가 불가능합니다.
- 배송지연안내를 받으신 경우는 주문 수입되는 경우이며, 주문 수입 제품의 경우 환불/교환이 불가능합니다.

- 고객변심에 의한 교환 및 반품 시 왕복 배송비는 고객님께서 부담하셔야 합니다.
- 제품구성품 및 스펙은 제조사 사정에 의해 예고없이 변경 될수도 있습니다.

서비스문의

기술문의는 상품Q&A 및 상단의 "제품문의" 게시판으로만 답변을 드리고 있사오니, 게시판에 문의 요청 드립니다.
견적서 출력 및 주문서작성 시에는 브라우저의 팝업창 해제를 취소하셔야 해당 창이 나타납니다.

제품리뷰

제품 리뷰를 적어주세요.

게시물이 없습니다

상품문의하기 모두 보기

상품 Q&A

상품에 대해 궁금한 점을 해결해 드립니다.

게시물이 없습니다

상품문의하기 모두 보기

 

이전 제품  
다음 제품