온습도 센서 모듈 -HS3001
(TEMP&HUM 17 CLICK)
개요
- 본 제품은 온습도 센서 모듈 -HS3001 입니다.
- HS3001 센서를 장착하고 있습니다.
- I2C 인터페이스를 가지고 있습니다.
- 3.3V/5V 시스템과 사용이 가능합니다.
특징
-
Type Temperature & humidity Applications Can be used for various temperature and humidity-related applications and a vast number of applications ranging from portable devices to products designed for harsh environments On-board modules HS3001 - highly accurate, fully calibrated relative humidity and temperature sensor from Renesas Key Features Low power consumption, high performance RH and °C sensing, digital output interface, independent programmable resolution settings, fully calibrated, and more Interface I2C Compatibility mikroBUS Click board size S (28.6 x 25.4 mm) Input Voltage 3.3V or 5V -
Temp&Hum 17 Click as its foundation uses the HS3001, a highly accurate, fully calibrated relative humidity and temperature sensor from Renesas. The humidity can be measured within a range of 0 to 100 %RH, while the temperature sensor is designed for a range of -10 to 80 °C. The typical accuracy for humidity is ±1.5 %RH in the measuring range of 10 up to 90 %RH at ambient temperature, and ±0.2 °C for temperature between -10 - +80 °C with very low power consumption.
The HS3001 digital sensor accurately measures relative humidity and temperature levels. The measured data is internally corrected and compensated for accurate operation over a wide range of temperature and humidity levels, which brings us to its highlighted feature - user calibration is not required. The entire output consists of only four bytes of data; that's why calculating the corresponding relative humidity in percent and temperature in degrees Celsius is very easy.
Temp&Hum 17 Click communicates with MCU using the standard I2C 2-Wire interface to read data and configure settings, supporting Standard Mode operation with a clock frequency up to 100kHz and Fast Mode up to 400kHz. The HS3001 is also factory-programmed to operate even in Sleep Mode. In Sleep Mode, the sensor waits for commands from the MCU before taking measurements and only performs conversions when it receives a Measurement Request command; otherwise, it is always powered down.
This Click board™ can operate with both 3.3V and 5V logic voltage levels selected via the VCC SEL jumper. This way, it is allowed for both 3.3V and 5V capable MCUs to use the I2C communication lines properly. However, the Click board™ comes equipped with a library containing easy-to-use functions and an example code that can be used, as a reference, for further development