수량을 선택해주세요.
정품 아두이노 기가 WiFi R1 보드 -BLE, STM32H747XI, Murata 1DX
(ARDUINO GIGA R1 WIFI)
개요
- 본 제품은 정품 아두이노 기가 WiFi R1 보드 입니다.
- 아두이노 메가나 두에와 동일한 폼팩터를 가지고 있지만 32비트 듀얼 코어 STM32H747XI 마이크로컨트롤러를 탑재하고 있습니다.
- 480 MHz로 동작하는 a Cortex-M7 코어와 240 MHz Cortex-M4 코어를 지원하여 두개의 코어끼리 통신이 가능하고, 한쪽에는 파이썬을 실행시키고 다른 한쪽에는 아두이노를 실행시킬 수도 있습니다.
- Murata 1DX 을 탑재하여 WiFi 및 블루투스를 사용할 수 있습니다.
특징
-
Board Name Arduino® GIGA R1 WiFi SKU ABX00063 Microcontroller STM32H747XI dual Cortex®-M7+M4 32bit low power Arm® MCU (datasheet) Radio Module Murata 1DX dual WiFi 802.11b/g/n 65 Mbps and Bluetooth® (datasheet) Secure Element ATECC608A-MAHDA-T (datasheet) USB USB-C® Programming Port / HID USB-A Host (enable with PA_15) Pins Digital I/O Pins 76 Analog input pins 12 DAC 2 (DAC0/DAC1) PWM pins 12 Misc VRT & OFF pin Communication UART Yes, 4x I2C Yes, 3x SPI Yes, 2x CAN Yes (Requires an external transceiver) Connectors Camera I2C + D54-D67 Display D1N, D0N, D1P, D0P, CKN, CKP + D68-D75 Audio Jack DAC0, DAC1, A7 Power Circuit operating voltage 3.3V Input voltage (VIN) 6-24V DC Current per I/O Pin 8 mA Clock Speed Cortex® M7 480 MHz Cortex® M4 240 MHz Memory STM32H747XI 2MB Flash, 1MB RAM Dimensions Width 53 mm Length 101 mm -
The Arduino GIGA R1 WiFi is designed for ambitious makers who want to step up their game. It levels the playing field for gamers, artists, sound designers and anyone coming to the tech world with big ideas on a budget – because it packs advanced features into an accessible component, with the same form factor as our popular Mega and Due.
Let's break down all the powerful features of this board.
Microcontroller (STM32H747XI): This dual core 32-bits microcontroller allows you have two brain talking to each other (a Cortex®-M7 at 480 MHz and a Cortex®-M4 at 240 MHz) you can even run micropython in one and Arduino in the other.
Wireless communication (Murata 1DX): Whether you prefer Wi-Fi® or Bluetooth®, the GIGA R1 WiFi got you covered. You can even quickly connect to the Arduino IoT Cloud and keep track of your project remotely. And if you are concerned about the security of the communication, the ATECC608A keeps everything under control.
Hardware ports and communication: Following the legacy of the Arduino Mega and the Arduino Due, the GIGA R1 WiFi has 4 UARTs (hardware serial ports), 3 I2C ports (1 more than its predecessors), 2 SPI ports (1 more than its predecessors), 1 FDCAN.
GPIOs and extra pins: We wanted to keep the same form factor of the Mega and the Due, so you can easily adapt your custom made shields to the GIGA R1 WiFi (remember this board works at 3.3V though!) and we added extra headers to access extra pins, leaving the total count to 76 GPIO pins, and the best part, you can access them from underneath, so keep your project as it is and just think on how to expand it. Also, we added two new pins: a VRTC so you can connect a battery to keep the RTC running while the board is off and an OFF pin so you can shut down the board.
Connectors: The GIGA R1 WiFi has extra connectors on board which will facilitate the creation of your project without any extra hardware. This board has:
- USB-A connector suitable for hosting USB sticks, other mass storage devices and HID devices such as keyboard or mouse.
- 3.5mm input-output jack connected to DAC0, DAC1 and A7.
- USB-C® to power and program the board, as well as simulate an HID device such as mouse or keyboard.
- Jtag connector, 2x5 1.27mm.
- 20 pin Arducam camera connector.
Higher voltage support: In comparison with its predecessors that support up to 12 volts, the GIGA R1 WiFi can handle a range of 6 to 24 volts.
