차동 압력 센서 모듈 -LMIS025B
(VAV PRESS CLICK)
개요
- 본 제품은 차동 압력 센서 모듈 -LMIS025B 입니다.
- LMIS025B 센서를 기반으로 디자인된 제품으로 0에서 25Pa의 범위의 압력 측정이 가능합니다.
- I2C 인터페이스를 가지고 있으며, 3.3V 시스템과 사용이 가능합니다.
특징
-
Type Pressure Applications Can be used for pressure measurements in automotive applications, industrial and consumer applications On-board modules LMIS025B - low differential pressure sensor that offers a digital output for reading pressure over the specified pressure span from First Sensor (part of TE Connectivity). Key Features Low power consumption, ultra-low pressure ranges, based on thermal microflow measurement, high flow impedance, outstanding long-term stability, on-chip temperature sensor, two modes of oprerations, and more Interface I2C Compatibility mikroBUS Click board size M (42.9 x 25.4 mm) Input Voltage 3.3V - NOTE: Keeping in mind the sensor's high sensitivity, adhere to precisely defined values of the measuring range, a maximum of 25Pa, to avoid damage to the sensor itself.
-
VAV Press Click as its foundation uses the LMIS025B, a low differential pressure sensor that offers a digital output for reading pressure over the specified pressure span from First Sensor (part of TE Connectivity). The innovative LMI technology features superior sensitivity, especially for ultra-low pressures ranging from 0 to 25Pa / 0 to 0.25mbar (0.1 in H2O). It is based on thermal flow measurement of gas through a micro-flow channel integrated within the sensor chip.
The extremely low gas flow through the sensor ensures high immunity to dust contamination, humidity, and long tubing compared to other flow-based pressure sensors, in addition to the outstanding long-term stability, precision with patented real-time offset compensation, and linearization techniques.
The LMIS025B offers two modes of operation: Continuous mode with a 5ms sampling time which provides a near-continuous stream of pressure data, and low-power mode with a 400μA Standby current which wakes the device from Sleep to serve pressure data "on-demand". The first measurement in either mode is available after a warm-up and conversion sequence, which takes approximately 25 ms.
VAV Press Click communicates with MCU using the standard I2C 2-Wire interface offering linearized digital output through a 16-bit sigma-delta A/D conversion. Besides, it also allows the choice of the least significant bit of its I2C slave address by positioning the SMD jumper labeled as ADDR SEL to an appropriate position marked as 0 and 1.
This Click board™ can be operated only with a 3.3V logic voltage level. The board must perform appropriate logic voltage level conversion before use with MCUs with different logic levels. However, the Click board™ comes equipped with a library containing functions and an example code that can be used, as a reference, for further development.