산업용 로터리 포텐셔미터
(Rotary Potentiometer - WDA-D35-D4C)
개요
- 본 제품은 산업용 로터리 포텐셔미터입니다.
- 연속적으로 회전이 가능하며 아날로그 전압 출력을 가진 제품입니다.
- 볼륨, 밝기, 감도 등을 조절하는 다이얼 등으로 사용이 가능합니다.
- 기계적으로 360도를 회전하고 전기적으로는 345도를 회전하기 때문에 한 회전당 15도가량의 blind spot이 있습니다.
- 아날로그 입력을 가진 장치와 연결하여 사용이 가능합니다.
- 본 제품을 모터의 사프트나 다른 제품에 연결하고자 할 경우에는 아래의 커플러를 추천합니다.
- 3422 - Spiral Beam Coupling 6-6mm
- 3426 - Jaw Coupling Half 6mm
특징
-
Product Specifications
Sensor Properties
Sensor Type Input (Rotary) Potentiometer Impedance 5 kΩ Mechanical Travel 360° Effective Electrical Travel 345°
Physical Properties
Shaft Diameter 6 mm Lifespan 50 million actuations Weight 50 g -
Connection
This sensor connects to any device with an Analog Input.You can use an analog sensor cable to connect the potentiometer to your Phidget. Just snip off the connector from one end of the sensor cable and solder the wires as shown in the diagram below.
The green terminal on the potentiometer is the wiper, and should be soldered to the data line. The other two terminals should be soldered to power and ground. Soldering ground to the middle terminal will result in increasing SensorValue with clockwise rotation, while soldering power to the middle terminal will result in decreasing SensorValue with clockwise rotation.