닌자스캔 라이트 데이터로거 키트
-GPS,가속도,대기압,자이로,지자계,온도 센서
(NinjaScan-Light Kit)
개요
- NinjaScan-Light은 컴팩트한 크기의 데이터로거로 GPS 리시버, 3축 가속도계, 대기압센서, 3축 자이로, 3축 지자계, 그리고 온도 센서를 장착하고 있는 제품입니다.
- 오픈소스 기반의 제품으로 각각의 센서의 데이터는 보드에서 지원하는 microSD 카드에 저장이 가능하며,
- 실시간 데이터를 USB 연결을 통해 덤프하는 것이 가능합니다.
- 제공되는 소프트웨어를 이용하여 이 파일을 CSV 포맷으로 변환 마이크로소프트 엑셀에서 사용할 수 있습니다.
- NinjaScan-Light 로거 모듈과 필요한 GPS안테나 및 케이블 등이 포함되어 있습니다.
특징
-
Sampling rate of each sensor
- gyro and accerolometer : 100Hz(10 ms),
- magnetometer : approximately 2 Hz (640 ms)
- barometer : approximately 3 Hz (320 ms)
- GPS : 5Hz (200ms)
The pre-written firmware is open-source and rewritable. As for the microSD reader, also SDHC and microSD for lager data capacity can be used. You can supply power either by USB or Li-poly battery (1 cell = 3.7V). An alternative way to supply power is from batteries of your computer and smartphone. You can charge a li-poly battery via USB. There is also Scan Ninja GUI tool [ZIP] available for converting the log data into CSV format for Windows users. This software is open-source as well.
-
Information
- Silicon Laboratories C8051F381 MCU with USB port
- u-blox NEO-6 series GPS receiver
- 6 DOF inertial sensor, Invernesses MPU-6000( 3-axis accelerometer, 3-axis angular velocity)
- 3-axis magnetic sensor, Freescale MAG3110
- Pressure and temperature sensor, Measurement specialties MS5611
- Power management IC with integrated Li-Ion battery charger, Linear Technology LTC3550
- microSD port supporting microSDHC/FAT32
-
Included:
- NinjaScan-Light main board
- GPS antenna (U.FL connector)
- Cable with JST ZH-housing (power supply)
- JST SH connector 12-pin housing
- pre-crimped cables for JST SH housing
- USB cable A to Micro-B
- U.FL-SMA (female) adapter cable (provides a connection for regular GPS antenna)
- BEC female connector with cable (power supply for radio controlled model planes or cars)
LiPo battery is not included.
The coating thickness of the cables can vary depending on the actual shipping period.