2 채널 모터 드라이버 -HG7881
(2 Channel Motor Driver -HG7881)
개요
- 본 제품은 두개의 HG7881칩이 장착되어 있는 모터 드라이버 입니다.
- 2.5V-12V의 전압에서 동작이 가능하여 3.3V/5V 시스템과 사용이 가능합니다.
- 2.5V-12V, 최대 0.8A 등급의 모터와 동작이 가능합니다.
- PWM 신호를 이용하여 모터 속도를 조절하고 디지털 출력을 이용하여 모터의 동작 방향을 변경할 수 있습니다.
- 또한 4선 2상 스텝모터를 동작시키는 것도 가능합니다.
특징
-
The onboard two HG7881 motor control chipModule can drive two DC motors or one 4-wire 2-phase stepper motorModule Input voltage: 2.5-12VEach channel has a 800mA continuous current output capacityPCB Size: 29.2 (mm) x 23 (mm)
-
Motor Control Interface Pin Description B-IA Motor B Input A (IA) B-IB Motor B Input B (IB) GND Ground VCC Operating Voltage 2.5-12V A-IA Motor A Input A (IA) A-IB Motor A Input B (IB) Motor Truth Table IA IB Motor State L L Off H L Forward L H Reverse H H Off We recommend applying a PWM signal to input IA to control the motor speed and a digital output to input IB to control its direction.
Note that the actual direction that "forward" and "reverse" turn your motor will depend on how it is oriented and wired. If your motor spins the wrong way, either swap the motor wires that connect to the output terminals or change the way the IA and IB bits get set in your program