DRV8833 듀얼 DC/스텝 모터 드라이버
(DRV8833 Dual DC/Stepper Motor Driver)
개요
- 본 제품은 DRV8833 듀얼 DC/스텝 모터 드라이버입니다.
- 두개의 DC 모터 혹은 한개의 bi-polar 혹은 uni polar 스텝모터를 채널당 1.2A까지 동작 시킬 수 있습니다.
- TB6612의 대체용으로 사용하기 적합한 제품입니다만 좀더 낮은 전압(2.7V -10.8V)을 사용하는 모터와 사용이 용이 합니다.
- 전류 제한 기능이 내장되어 있으며, 1A로 전류 제한이 기본으로 설정되어 있습니다.
특징
-
Motor voltage: 2.7V~10.8VPeak current: 2ALow on-resistance of MOSFET: HS + LS 360mΩ
-
Pin Description:Vmotor: Motor voltage interfaceGND: power groundVM: device powerAIN1: Motor A H bridge input 1AIN2: Motor A H bridge input 2BIN1: Motor B H bridge input 1BIN2: Motor B H bridge input 2SLP: sleep mode inputFLT: fault output, when thermal shutdown or overcurrent occursA0UT1: Motor A H bridge output 1A0UT2: Motor A H bridge output 2B0UT1: Motor B H bridge output 1B0UT2: Motor B H bridge output 2AISEN: Bridge A ground (connected to the current detection resistor for bridge A, if no current control is required, connect to GND)BISEN: Bridge B ground
문서
-
Instructions for useEach H-bridge has two digital inputs (half of each bridge). You can use the PWM input to control the motor speed and run at 2.7V-10.8V logic/motor power. The motor voltage is the same as the logic voltage.
- Adafruit DRV8833 DC/Stepper Motor Driver Breakout Board
- Datasheets, PCB CAD files, diagrams, Fritzing object and more in the tutorial