아두이노용 CAN FD 통신 쉴드 -MCP2517, MCP2542
(CAN FD Shield for Arduino)
개요
- 본 제품은 아두이노용 CAN FD 통신 쉴드입니다.
- SPI 인터페이스를 가진 MCP2517 CAN 버스 컨트롤러와 MCP2542 CAN 트랜시버를 기반으로 디자인된 제품입니다.
- OBD-II 컨버터 케이블을 연결하고 OBD-II 라이브러리를 사용하여 OBD 장치를 디자인 하여 볼 수 있습니다.
- 알림: 핀헤더는 납땜되어 있지 않습니다.
특징
- • Work at CAN-FD and CAN 2.0
- • Industrial standard 9 pin sub-D connector
- • OBD-II and CAN standard pinout selectable.
- • Changeable chip select pin
- • Changeable CS pin for TF card slot
- • Changeable INT pin
- • Arduino Uno pin headers
- • 2 Grove connectors (I2C and A0/A1)
- • SPI Interface up to 10 MHz
-
Hardware Overview:
-
DB9 Interface - to connect to OBDII Interface via a DBG-OBD Cable.
- V_OBD - It gets power from OBDII Interface (from DB9)
- Led Indicator:Terminal - CAN_H and CAN_L
- PWR: power
- TX: blink when the data is sending
- RX: blink when there's data receiving
- INT: data interrupt
- Terminal - CAN_H and CAN_L
- Arduino UNO pin out
- A0/A1 Grove connector
- I2C Grove connector
- ICSP pins
- IC - MCP2542FD, a high-speed CAN-FD transceiver (datasheet)
- IC - MCP2517FD, stand-alone CAN controller with SPI interface (datasheet)
- SD card slot
- 120Ω terminal resistor switch
-