테스트 후크 프로브 - 4핀 JST SH 커넥터 케이블
(JST-SH 4-pin Cable with Micro SMT Test Hooks
- STEMMA QT / Qwiic)
개요
- 본 제품은 테스트 후크 프로브 - 4핀 JST SH 커넥터 케이블 입니다.
- 한쪽에는 4핀 JST SH 커넥터가 다른 한쪽에는 테스트 후크 프로브가 장착되어 있는 케이블입니다.
- 보드에 센서/모듈 등을 납땜 없이 연결하고 테스트하여 보고자 할 경우에 사용하면 좋은 제품입니다.
특징
- N/A
문서
-
This cable will make it super easy to use our plug-and-play STEMMA QT boards and controllers with chips, breakouts, and other devices that are I2C compatible but don't come with a STEMMA QT socket already on 'em.
On one end you get a Qwiic / STEMMA QT connector (technically known as a JST SH 4-pin plug) into 4 individual wires with 'micro hook' ends. The hooks are much finer pitch than our alligator clip QT cable, and can easily grab on to through-holes, wires, DIP, or SOIC/SOP chips. These are not small enough for TSSOP's or TQFPs. If you need to add test points, we stock through-hole ones that fit nicely into 0.1" holes
Please note - These hooks are not the high-quality ones you see that come with expensive logic analyzers - but they do get the job done!
This cable has a JST SH 4-pin on one side and micro hook clips on the other.
- Black for GND
- Red for V+ - For Qwiic boards, 3.3V. For STEMMA QT, 3 to 5V.
- Blue for SDA
- Yellow for SCL
Check out all our STEMMA QT offerings here
For more information about JST SH connectors, visit the JST website