그루브 WiFi 모듈 -WizFi360
(Grove UART WizFi360)
개요
- 본 제품은 그루브 WiFi 모듈 -WizFi360 입니다.
- TCP/IP 스택을 가진 MCU WizFi360을 탑재한 제품으로 AT 명령어가 미리 프로그래밍 되어 있어 간단한 AT 명령으로 WiFi 제어가 가능합니다.
특징
- ● Compatible with multiple modes: Support SoftAP/Station/SoftAP+Station mode and TCP Server / TCP Client / UDP operating mode
● Efficient matching network: Support auto 20MHz / 40MHz bandwidth, UART to WIFI two-way transparent transmission function can enable users to quickly network
● Secure communication guarantee: Support WPA_PSK / WPA2_PSK encryption that provides privacy and security for data communication over the network.
● View network status in real-time: The keep-alive and 'ping' commands allow you to monitor the TCP connection and the current network state.
● Easy to use: Just a fast & simple plug-and-play device that allows you to easily add wireless capabilities.
● High compatible baud rate: Serial port baud rate up from 600bps to 2Mbps with 16 common values -
supporting agreement:
802.11 b/g/n
frequency:
2.4 GHz to 2.5 GHz
Data rate:
11 Mb/s, 54 Mb/s
Interface Type:
Serial
Output:
19 dBm
Supply voltage - min:
3 V
Supply voltage - max:
3.6 V
Transmit Supply Current:
210 mA, 230 mA
Receive supply current:
110 mA
Lowest operating temperature:
- 40 C
Highest operating temperature:
+ 85 C
Antenna Connector Type:
PCB
Working power supply voltage:
3 V to 3.6 V
product type:
WiFi Modules
Protocol - WiFi - 802.11:
WiFi
문서
- Grove – WizFi360 Module Wiki
- Grove UART WizFi360 is based on Wiznet's wizfi360 Wi-Fi module, which is a cost-effective WiFi module that supports both TCP/IP and microcontroller and multiple modes
- Grove UART WizFi360 is based on Wiznet's wizfi360 Wi-Fi module. It is a microcontroller that supports both TCP/IP and microcontrollers. It takes only a few lines of code to allow your microcontroller to interact with WiFi networks. Each WizFi360 module is pre-installed AT command set firmware, which means you can send simple text commands to control the device. And with connectivity provided through a 2.4GHz wireless connection, as well as WizFi360's compatibility with IEEE802.11 b/g/n standards and support for SoftAP, StaTIon, and SoftAP+StaTIon modes. Grove UART WizFi360 saves a lot of time by being a standalone Internet support solution.