듀얼밴드 GNSS RTK 모듈 -LC29H
(GNSS RTK 3 CLICK)
개요
- 본 제품은 듀얼밴드 GNSS RTK 모듈 -LC29H입니다.
- LC29H GNSS 모듈을 탑재하고 있는 제품으로 GPS, BDS, Galileo, GZSS, GLONASS 위성 신호를 받을 수 있습니다.
- 다양한 위성신호를 받아 위치 정보를 높일 수 있습니다.
특징
-
HOW DOES IT WORK?
GNSS RTK 3 Click is based on the LC29H(DA/EA), a dual-band, multi-castellation GNSS module from Quectel. With internal LNA and SAW filters, the module achieves better sensitivity and anti-interference capability. Dual frequency support helps the module deliver CEP accuracy values of 1m in autonomous mode and centimeter levels while using the RTK functionality. Integrated RTK (Real-Time Kinetic) position engine provides a sub-meter accuracy with fast convergence time and outstanding performance. This module supports the RTK Rover technique. Before implementing the RTK navigation technique, the module must receive the RTK differential data via its UART port. After validating the differential correction data, the module will enter differential or RTK float mode. The expected accuracy at RTK fixed mode is lower than 20cm.
The LC29H(DA/EA) module features an integrated AGNSS function, integrated AIC, and jamming function and is capable of reception of L1 and L5 GNSS band signals concurrently. The receiver chip is built using 12nm technology and provides advanced power management, which enables low-power GNSS sensing and position fix, which in turn makes the module ideal for power-sensitive and battery-powered systems. There is a DSEL switch with 0 and 1 positions. By setting it to a 0 position, the UART interface can be used for communication and downloading, while the I2C can only be used for communication. The 1 position sets UART for downloading only, while the I2C interface can be used for communication and downloading.
The GNSS RTK 3 Click has an SMA antenna connector for connecting an appropriate antenna, also offered by MIKROE, such as a GNSS L1/L5 Active External Antenna. This antenna is an excellent choice for all GNSS applications supporting L1 and L5 band frequencies. You can also control the antenna by deactivating it in power-saving mode, lowering power consumption.
To interface different voltage levels of the host MCU, GNSS RTK 3 Click is equipped with the TXS0108E, an 8-bit bi-directional level-shifting voltage translator from Texas Instruments. In case of a mains supply failure, the module can use a backup supply voltage from a connected battery. Backup voltage supplies the real-time clock and battery-backed RAM and enables all relevant data to be saved in the backup RAM to allow a hot or warm start later. If no battery is present, the backup is powered over the 3.3V rail of the mikroBUS™ socket.
As mentioned, the GNSS RTK 3 Click uses a standard 2-Wire UART interface to communicate with the host MCU with commonly used UART RX and TX pins. The UART 2 interface pins are exposed on a 1.8V DBG header for debugging purposes. The module supports baud rates 9600 up to 3Mbps, while the 115200bps is the default. Besides the UART interface, you can also use a standard 2-Wire I2C interface to communicate with the host MCU with a data rate of up to 400kbps. The module will use the NMEA 0183/RTCM 3.x protocols in both cases. You can update the LC29H(DA/EA) firmware using any of those interfaces. Using the RST pin, you can reset the module or wake it up using the WUP pin. Besides the 1PPS LED, the one pulse per second can also be monitored over the PPS pin.
This Click board™ can operate with either 3.3V or 5V logic voltage levels selected via the VCC SEL jumper. This way, both 3.3V and 5V capable MCUs can use the communication lines properly. Also, this Click board™ comes equipped with a library containing easy-to-use functions and an example code that can be used as a reference for further development.
SPECIFICATIONS
Type GPS/GNSS Applications Can be used for the development of high-precision positioning for demanding industrial applications like machine control, ground robotic vehicles, and unmanned aerial vehicles (UAV) On-board modules LC29H(DA/EA) - dual-band, multi-castellation GNSS module from Quectel Key Features Multi-GNSS engine for GPS, GLONASS, BDS, Galileo, and QZSS, reception of L1 and L5 GNSS bands signals concurrently, RTK providing sub-meter accuracy width fast convergence time and outstanding performance, integrated LNA for high sensitivity, integrated SAW filter for noise cancellation, and more. Interface I2C,UART ClickID Yes Compatibility mikroBUS Click board size L (57.15 x 25.4 mm) Input Voltage 3.3V or 5V