SparkCore 파티클 메이커 키트
(Particle Maker Kit (with Core))
개요
- 본 제품은 Spark Core WiFi 개발 플랫폼을 탑재한 메이커 키트입니다.
- 인터넷 기반 프로젝트를 시작하기 위해 필요한 모든 부품을 포함하고 있는 제품입니다.
- Spark Core는 작고 저전력이며 WiFi관련한 모든 일을 처리하여 IoT 프로젝트를 진행하기에 적당한 제품입니다.
- 로컬 네트워크에서 데이터를 주고 받는 것 대신, cloud 백엔드 웹사이트 플랫폼(spark.io)이 있어 데이터를 끊김없이 주고 받을 수 있습니다.
-
특징
-
Core Specs:
- Texas Instruments CC3000 Wi-Fi module
- STM32F103 72Mhz ARM Cortex M3
- 128KB flash, 20KB RAM, 2MB external flash
- 802.11b/g
- Smart Config setup
- FCC/CE/IC certified
- Core Datasheet
- 10x 10nF Ceramaic Capacitor
- 10x 100nF Ceramic Capacitor
- 5x 100uF Electrolytic Capacitor
- 5x 8-Pin Female Headers
- 2x 40-Pin Male Breakaway Headers
- 1x 40-Pin Male Breakaway Dual-Headers
- 5x Red 3mm LEDs
- 5x Green 3mm LEDs
- 1x RGB LED
- 1x NPN Transistor
- 6x 1N4004 Diodes
- 1x Emax ES08A Mini RC Servo Motor
- 1x Deluxe Jumper Wire Pack
- 1x USB Micro B Cable
- 1x Mini DC Motor
- 1x Vibration Motor
- 1x Piezo Buzzer
- 3x Mini Pushbuttons
- 2x DPDT Switch
- 1x Shift Register IC
- 2x Tilt Sensor
- 1x Temperature Sensor
- 2x Themistor
- 1x Force-Sensitive Resistor
- 2x Photo Resistors
- 10x 330-Ohm Resistors
- 10x 1K-Ohm Resistors
- 10x 10K-Ohm Resistors
- 1x Rotary Potentiometer
- 1x Proto-board
- 1x Spark Core
문서
- Particle website
- For technical support with your Particle product visit the Particle forums or submit a request. For replacement parts or warranty assistance visit Particle support.