브러쉬 DC 모터 컨트롤러/듀얼 H-Bridge
(Booster-B36V2A5 (Brushed DC Motor
Controller/Dual H-bridge))
개요
- 본 Booster-B36V2A5는 Brushed DC 모터 컨트롤러로 듀얼 H-bridge 파워 드라이버입니다.
- 2x4 N 채널 MOSFET(with low Drain-Source On-Resistance, RDS(ON)<1.6mΩ) 과 여러 보호기능을 탑재하였습니다.
- DC 모터를 제어하거나 고출력 LED를 제어 등등에 사용할 수 있습니다.
- 추가로 RS485와 I2C를 하나의 커넥터에 가지고 있으며 같은 레지스터를 사용하여 둘중 하나를 선택하여 사용할 수 있습니다.
- 모든 기능은 사용자 레지스터를 읽고 쓰는 것으로 동작합니다. (몇몇 특별 명령은 예외)
- DFR0345/DFR0346 과 사용 가능합니다.
특징
- Supply Voltage: DC 6 ~ 36V
- Continuous Current: 2 * 5A / 1 * 10A(Just limited by D-Sub connector, 2*15A / 1*20A for mosfets and sampling resistors)
- Baudrate Range: 1200 ~ 115200bps
- I2C Speed: 100KHz
- Size: 54.5mm * 50mm * 30.5mm (L*W*H)
- It integrates various protections(Under-Voltage, Over-Voltage, Over-Temperature, Over-Current, Out-Of-Control and Power-Reverse). The response-time of the Over-Current protection can be flexibly set and performed by hardware(comparator), which makes the protection more timely and reliable.
- There are 18 control modes for different applications(see below).
- It integrates a stable and high-efficiency RS485, and the baud rate can be detected automatically. There is no instruction packet loss when the baud rate is not higher than 28800bps, otherwise the first instruction packet will be discarded. Furthermore, it is recommended to send the sync bytes(0xff 0xff 0xff 0xff) first when the baud rate is higher than 28800bps.
- It integrates a stable and high-efficiency I2C.
- Booster-B36V2A5 (Brushed DC Motor Controller) x1
문서
연관제품
- 연관제품 1