TTL Serial JPEG Camera - NTSC Video
(TTL 시리얼 JPEG 카메라 - NTSC비디오)
개요
- 본 카메라 모듈은 보안 시스템에 사용하기 위해 디자인 된 제품으로 NTSC 모노크롬 비디오를 출력 할 수 있으며, 비디오를 컬러로 캡쳐하여 TTL과 같은 시리얼 링크로 보낼 수 있습니다.
- 사진은 640x480, 320x240, 160x120 해상도로 캡쳐가 가능하며 SD카드에 저장하기 쉽게 JPEG이미지로 저장됩니다.
- 보안, 사진 프로젝트, 데이터 로깅 프로젝트에 적합합니다.
- 본 카메라는 manually adjustable focus, auto-white-balance, auto-brightness, auto-contrast 기능 및 motion detection기능을 가지고 있습니다. 만약 화면상에 무엇인가가 움직인다면 경고 메세지를 보낼 수 있습니다.
- 모듈을 사용하는 것은 매우 쉬우며 단 두개의 디지털 핀만을(아니면 TTL 시리얼 포트)필요로 합니다.
- 기본 설정으로 38400 보오드 레이트가 설정되어 있지만 속도를 변경하여 이미지를 좀더 빨리 전송이 가능합니다.
- 아두이노 라이브러리: really nice Arduino library with example code (이미지 크기변경, 압축품질, 움직임 검출 등)
- 튜토리얼: detailed tutorial
- Example photo 1 (outside street) & example photo 2 (inside person)
- 본 카메라는 아두이노 우노와 훌륭히 동작합니다. MEGA와는 아직 호환되지 않습니다.
- 알림: 저항은 제조사 사정에 따라 포함되지 않을 수 있습니다.
특징
- Module size: 32mm x 32mm
- Image sensor: CMOS 1/4 inch
- CMOS Pixels: 30M
- Pixel size: 5.6um*5.6um
- Output format: Standard JPEG/M-JPEG
- White balance: Automatic
- Exposure: Automatic
- Gain: Automatic
- Shutter: Electronic rolling shutter
- SNR: 45DB
- Dynamic Range: 60DB
- Max analog gain: 16DB
- Frame speed: 640*480 30fps
- Scan mode: Progressive scan
- Viewing angle: 60 degrees
- Monitoring distance: 10 meters, maximum 15meters (adjustable)
- Image size: VGA(640*480), QVGA(320*240), QQVGA(160*120)
- Baud rate: Default 38400, Maximum 115200
- Current draw: 75mA
- Operating voltage: DC +5V
- Communication: 3.3V TTL (Three wire TX, RX, GND)
튜토리얼
- Check out our detailed tutorial on how to use this camera module with an Arduino (and in general
Fabien's Netduino + Camera tutorial
Tutorials on the Adafruit Learning System featuring this product: TTL Serial Camera
Snap, Snap!
다운로드
- We have a fairly full-featured Arduino library with examples that demonstrate how to use the camera, check the tutorial for details
- The datasheet for the DSP processor itself (not terribly useful for the module but good for reference
- PTC-08 module datasheet contains dimensional drawings
- This is the DSP management tool (windows only sorry!) it allows you to tweak pretty much everything on the camera as well as test it out via a serial port
- This is the 'protocol cheat sheet' for the sensor its a little crummy - we suggest reading our library code and porting it instead of trying to do it from scratch with this sheet
- Fabien's Netduino + Camera tutorial