RFM96W 로라 라디오 트랜시버 모듈 -433Mhz
(Adafruit RFM96W LoRa Radio Transceiver Breakout - 433 MHz)
개요
- 데이터를 먼거리로 보내고 받으시고 싶으신가요?
- WiFi, 블루투스는 고속 데이터전송에 유리하지만, 고속으로 데이터를 보내실 필요가 없으시다면 433Mhz나 900Mhz 의 낮은 주파수 대역을 이용하시면 더 멀리 통신이 가능합니다.
- 그리고 이런 패킷 라디오는 WiFi나 블루투스 보다 더욱 단순하여 패어링, 스캔 등의 설정없이 송신 모듈이 보낸 것을 수신 모듈이 수신하게 됩니다. 수신 모듈은 수신하게 되면 reply를 다시 보내줄 수 있습니다.
- 본 모듈은 패킷화, 에러 보정 및 자동 재전송을 할 수 있습니다.
- 아두이노 및 다른 마이크로컨트롤러와 잘 동작하며, 센서 노드 네트워크를 구축하거나 마을단위에서 데이터를 전송하고자 할 때 사용이 가능합니다.
- 전압레귤레이터와 레벨쉬프터가 있어 3V 혹은 5V 장치와 사용이 가능합니다.
- 모듈레이션 타입과 주파수에 따라 총 4가지 제품이 있습니다.
- 본 모듈은 +20dBm 패킷 라디오 모듈로 와이어 안테나로 약 2Km 가량, 지향성 안테나로 약 20km가량 통신이 가능합니다
특징
-
This is the LoRa radio module 433 MHz version! These are +20dBm LoRa packet radios that have a special radio modulation that is not compatible with the RFM69s but can go much much farther. They can easily go 2 Km line of sight using simple wire antennas, or up to 20Km with directional antennas and settings tweakings
- Packet radio with ready-to-go Arduino libraries
- Uses the amateur or license-free ISM band (ITU "Europe" license-free ISM or ITU "American" amateur with limitations)
- Use a simple wire antenna or spot for uFL or SMA radio connector
- SX1276 LoRa® based module with SPI interface
- +5 to +20 dBm up to 100 mW Power Output Capability (power output selectable in software)
- ~100mA peak during +20dBm transmit, ~30mA during active radio listening.
- Range of approx. 2Km, depending on obstructions, frequency, antenna and power output
All radios are sold individually and can only talk to radios of the same part number. E.g. RFM69 900 MHz can only talk to RFM69 900 MHz, LoRa 433 MHz can only talk to LoRa 433 MHz, etc.
Each radio comes with some header, a 3.3V voltage regulator and levelshifter that can handle 3-5V DC power and logic so you can use it with 3V or 5V devices. Some soldering is required to attach the header. You will need to cut and solder on a small piece of wire (any solid or stranded core is fine) in order to create your antenna. Optionally you can pick up a uFL or SMA edge-mount connector and attach an external duck.
Check out our fine tutorial for wiring diagrams, example code, and more!
문서
-
Dimensions: 29mm x 25mm x 4mm / 1.14" x 1.0" x 0.2"
-
Weight 3.1g
- Adafruit RFM69HCW and RFM9X LoRa Packet Radio Breakouts