라즈베리 파이용 프로토타이핑 HAT
(Prototyping Hat for Raspberry Pi)
개요
- 본 제품은 라즈베리 파이용 프로토타이핑 HAT 입니다.
- 라즈베리 파이 모델 B+, 2B, 3B와 사용이 가능한 제품으로 파이의 위에 꼽아 사용이 가능합니다.
- 라즈베리 파이의 GPIO 헤더에 꼽아 사용가능하게 보드 밑면에 헤더가 존재하며, 넓은 프로토타이핑 공간이 지원됩니다.
- 프로토타이핑 공간의 절반은 브레드보드 스타일이며, 다른 절반은 perfboard 스타일로 DIP 칩이나 쓰루홀 부품을 장착할 수 있게 되어 있습니다.
- 또한 1개의 SOIC SMD 칩을 장착할 수 있는 슬롯이 지원됩니다.
- 보드위 장착된 female 헤더를 통해 점퍼와이어를 연결할 수 있으며, 또한 3.5mm 스크류 터미널 블럭이 있어 전선 등을 더 쉽게 연결할 수 있습니다.
특징
- A big prototyping area, half of which is 'breadboard' style and half of which is 'perfboard' style so you can wire up DIP chips, sensors, and the like.
- Along the edges of the proto area, all the GPIO/I2C/SPI and power pins are broken out to 0.1" stips so you can easily connect to them.
- On the edges of the prototyping area, all of the breakout pins are also connected to labeled 3.5mm screw-terminal blocks. This makes it easy to semi-permanently wire in sensors, LEDs, etc.
- There's also a 4-block terminal block broken out to 0.1" pads for general non-GPIO wiring.
- A SOIC and a TSSOP surface mount chip breakout area, for those chips that dont come in DIP format.
- Comptiable EEPROM chip: AT24C08BN-SP25-T
- POWER LED indicator
문서
- n/a