75W DC-DC 컨버터 -5A, XL4015, 전압 디스플레이
(75W DC-DC converter - 5A, XL4015)
개요
- 본 제품은 전압 측정 모듈 및 디스플레이가 포함된 DC-DC 전원 컨버터입니다.
- 입력 및 출력 전압을 측정 디스플레이할 수 있어 매우 편리하게 사용할 수 있는 제품입니다.
- 전압은 모듈상의 포텐셔미터를 이용하여 조절이 가능하며 약 +/- 0.1V의 분해능을 가지고 있습니다.
- 모듈에는 두개의 버튼(IN/OUT)과 두개의 LED(IN/OUT)가 있습니다.
- 입력 전압을 측정 디스플레이 하고 싶으실 경우는 입력 버튼을, 출력 전압을 디스플레이하고 싶으실 경우는 출력 버튼을 누르면 LED에 불이 들어오면서 7-세그먼트 디스플레이에 전원이 표시되게 됩니다.
- 전원 변환시 칩에 발생할 수 있는 열을 식힐 수 있는 방열판과 모듈에 장착하여 사용할 수 있는 스페이서 세트가 포함되어 있습니다.
- 알림: 입력전압이 4V 이하일 경우 디스플레이는 동작하지 않습니다.
특징
- Input voltage: 3.5V-28V
- Adjustable Output Voltage: 1.25V~26V
- Input current: Rated current is 1A
- Output current: Rated current is 1A
- Dimension: 53mm x 38mm x 21mm
- Input: 'IN+' input is Positive, 'IN-' type negative
- Output: 'OUT+' output is Positive, 'OUT-' type negative
문서
- XL4015-Datasheet
- This module can be also calibrated manually as following method:
- 1. Power up the module with a stable and accurate power supply , such as a 5V power supply, then shot press the button on the right side to select which one do you need to adjust (input or output), and long pressing (press time > 2S) the button(right) makes the module enter the calibration model, after releasing the button, the related LED would blink to indicate which voltage is now calibrating, and the numeric display blinks the correction value.
- 2. Short press the button to change the correction value, Short press the button on the right side, voltage increases one unit, Short press the button on the left side, voltage reduce one unit, for example, if your power supply is 5V, but the result of voltage meter is 4.8, you need to set the value to 5V.
- 3. Long press button on the right side(press time ≈ 2S), to store the voltage correction value.
- 4. Calibrate the output voltage in the same way above; The correction value will be stored in nonvolatile memory.
Tips:You can contrarotate to the potentiometer more than 10 circles at first. Because of the default output voltage of this module is 20V.