EZO 용존 산소량 측정 모듈
(EZO Dissolved Oxygen Circuit)
개요
- 본 제품은 작은 크기지만 강력한 성능을 가지고 있는 용존산소량 측정 모듈입니다.
- 최고 수준의 안정성과 정교성을 보여주는 제품으로 0.01 에서 +35.99 mg/L 까지 측정이 가능합니다.
- 일반적인 용존 산소 센서 프로브(galvanic HDPE dissolved oxygen probe/sensor/electrode)와 같이 사용이 가능한 제품입니다.
- 용존 산소량을 프로브에서 읽을 수 있으며, 높은 수준의 정교한 측정 오차를 가집니다.
- UART 및 I2C 인터페이스를 지원하며, 측정된 값은 ASCII 형태로 출력이 됩니다.
- 3.3V 및 5V 시스템에서 동작이 가능하며, 아두이노 및 라즈베리 파이 예제가 지원됩니다.
특징
- Reads
• Full range dissolved oxygen readings from 0.01 to +35.99 mg/L
• Accurate dissolved oxygen readings down to the
hundredths place (+/- 0.2)
• Temperature compensation
• Salinity compensation
• Pressure compensation
• Flexible calibration protocol supports one point or two calibration
• Calibration required only once per year with
an Atlas Scientific™ Dissolved Oxygen probe
• Single reading or continuous reading modes
• Data format is ASCIITwo data protocols
Sleep mode power consumption
• UART asynchronous serial connectivity
• (RX/TX voltage swing 0-VCC)
• I2C (default I2C address 0x61)
• Compatible with any microprocessor that supports UART,
or I2C protocol
• Operating voltage: 3.3V to 5V
• Works with any off-the-shelf galvanic
• HDPE dissolved oxygen probe
• 0.995mA at 3.3V
Circuit Specs
• Dimensions: 13.97mm X 20.16mm (0.55" X0.79")
• Weight: 1.77 grams
문서
- EZO™ Dissolved Oyxgen Circuit Datasheet
- Understanding Dissolved Oxygen
- Dissolved Oxygen Wiring Diagram
- Arduino Uno Sample Code
- Arduino Mega Sample Code
- Arduino I2C Sample Code
- Raspberry Pi Sample Code
- Raspberry Pi I2C Sample Code
- Dissolved Oxygen CAD Footprint File (*.dxf)
- RoHS Certificate
- CE Certificate