MicroSD 카드 모듈
(MicroSD card breakout board+)
개요
- 본 제품은 microSD 어댑터 모듈로 사용하기 쉽게 디자인 된 제품입니다.
- 레벨 변환 회로가 있어 5V/3.3V 시스템과 사용이 가능합니다.
- 4개의 핀으로 2GB이상의 카드를 읽고 쓸 수 있습니다.
- SD카드를 읽을 시에는 LED가 빛이 나게 됩니다.
- 네개의 마운팅 홀이 있어 마운팅시 용이합니다.
특징
- Onboard 5v->3v regulator provides 150mA for power-hungry cards
- 3v level shifting means you can use this with ease on either 3v or 5v systems
- Uses a proper level shifting chip, not resistors: less problems, and faster read/write access
- Use 3 or 4 digital pins to read and write 2Gb+ of storage!
- Activity LED lights up when the SD card is being read or written
- Four #2 mounting holes
- Push-push socket with card slightly over the edge of the PCB so its easy to insert and remove
- Comes with 0.1" header (unattached) so you can get it on a breadboard or use wires - your choice
- Tested and assembled here at the Adafruit factory
- Works great with Arduino, with tons of example code and wiring diagrams
- Dimensions (without 0.1" header):
- Length:31.85mm/1.25in
- Width:25.4mm/1.00in
- Height:3.75mm/0.15in
- Weight:3.43g/0.12oz
문서
- TTL Serial Camera
- 2.8" TFT Touchscreen
- Micro SD Card Breakout Board Tutorial
- files and schematics are at the github repository
- Netduino driver, netduino sample and Documentation parts one and two
- To use with an Arduino, connect GND to ground, 5V to 5V, CLK to pin 13, DO to pin 12, DI to pin 11, and CS to pin 10. Then you can use the wonderful SDfatLib which supports FAT and FAT32 SD cards. For details on getting started, check out our detailed tutorial discusses microSD cards, wiring and how to use this breakout board with an Arduino