Sipeeed Maix Go 인공지능 IoT 개발 키트 -RISC-V K210
(Maix Go AI Development Kit RISC-V K210 IOT)
개요
- 본 제품은 Sipeeed Maix Go 인공지능 IoT 개발 키트 -RISC-V K210입니다.
- K210 RISC 커널 인공지능 칩을 탑재하고 있습니다.
- MicroPython 을 지원하며, MaixPy firmware는 microPython firmware로 기존의 전통적인 MCU에서 인공지능 알고리즘을 쉽게 이용할 수 있게 하여 줍니다.
- MaixPy 펌웨어는 대부분의 OpenMV API와도 호환이 됩니다.
- 모듈과 사용가능한 LCD, 카메라 모듈이 포함된 제품입니다.
특징
- Controller Chip: K210
- Chip Kernel: dual-core RISC-V 64bit IMAFDC
- Main Frequency: nominal 400M, can be overclocked to 600M
- Memory: 6MB general purpose memory+2MB AI memory
- Flash: 16MB
- MicroPython Support
- Compatible with Most OpenMV Algorithms
- Support Neural Network Algorithms: encapsulates the nnn class of mpy
- Neural Network Algorithms Speed: hundreds of GOPS (thousands of times STM32)
- Face Detection Speed: conventional algorithms 6 frames
- Image Recognition: QVGA@60FPS/VGA@30FPS
- Debugging Support: UART and JTAG interface
- 3-Axis Digital Accelerometer: I2C interface
selectable range: ±2g, ±4g, ±8g, ±16g
- RTC: on-board 32.768K crystal connected with STM32F103
- LCD Interface: Maix-LCD board (with resistive touch screen) is directly connected to the GO
- GPIO Interface: all GPIOs connected to header 2*20P 2.54mm
- DVP Camera Interface: 24P 0.5mm FPC connector
- On-board MEMS Microphone
- On-board TF Card Slot
- Microphone Array Connector
- Lithium Battery Port
- USB Type-C Port
- Audio Encoding Chip+Dual-channel Audio Amplifier
- RGB LED
- 200W Camera, M12 lens mount, default with 4mm focal length HD lens
- 1W Small Speaker
- Three-way Dial Button
- 2.8" LCD with resistive touch screen, resolution 320*240
- Dimension: 90x 61.5x9.5mm/3.54x2.42x0.37" (installed)
- Maix GO Size: 60x 88mm/2.36x3.46"
- Input Voltage: 4.8~5.2 V
- Input Current: >600mA
- Temperature Rise: <30 K
- Operating Temperature: -30~85 ºC
- Wireless Standard: 802.11 b/g/n
- Frequency Range: 2400Mhz~2483.5Mhz
- TX Power: 802.11.b : +15dBm
802.11.n : +10dBm (65Mbps)
- Antenna Connector: IPEX 3.03.0mm
- WiFi Mode: Station/SoftAP/SoftAP+Station
-
SHIPPING LIST
- Maix Go Development Board x1
- Acrylic Case x1
- 200 W Pixel M12 Camera (4mm focal length HD Lens) x1
- 500mAH Lithium battery x1
- 2.8"OVGA LCD x1
- 1W Small Speaker x1
- Type-C High Quality USB Cable x1
- WiFi Antenna x1