uBlox L1 GNSS 모듈 -MIA-M10Q
(GNSS 14 CLICK)
개요
- 본 제품은 uBlox L1 GNSS 모듈 -MIA-M10Q 입니다.
- L1 GNSS 신호를 수신할 수 있는 MIA-M10Q 칩을 기반으로 디자인된 제품으로 GNSS (GPS, GLONASS, Galileo, BeiDou) 신호 동시 수신이 가능합니다.
특징
- GNSS 14 Click is a compact add-on board that provides fast positioning capability to your application. This board features the MIA-M10Q, a standard precision GNSS module from u-blox. It has an exceptional sensitivity and acquisition time for all L1 GNSS signals, attributed to its integrated M10 standard precision low-power platform. The M10 platform supports concurrent reception of four GNSS (GPS, GLONASS, Galileo, and BeiDou). The high number of visible satellites enables the receiver to select the best signals. This maximizes position availability, particularly under challenging conditions like deep urban canyons. This Click board™ makes the perfect solution for the development of both acquisition and tracking devices and represents an ideal product for automotive, consumer, and industrial tracking applications.
-
HOW DOES IT WORK?
GNSS 14 Click is based on the MIA-M10Q, a standard precision GNSS module from u-blox. Super-S (Super-Signal) technology offers great RF sensitivity and can improve the dynamic position accuracy with small antennas or in non-line-of-sight scenarios. It possesses the SMA antenna connector with an impedance of 50Ω, which can connect the appropriate GNSS antenna that MIKROE offers, like GPS&GLONASS Passive Antenna, for improved range and received signal strength. u-blox receiver includes a time pulse function that provides pulses with a configurable pulse period, pulse length, and polarity (rising or falling edge). It also features a backup voltage supply option. You can attach a battery to the GNSS 14 Click over the BAT connector.
GNSS 14 Click uses a standard 2-wire UART interface to communicate with the host MCU with commonly used UART RX and TX pins and a baud rate from 4800 up to 921600bps. You can also use an I2C interface for the same purpose, but only in slave mode with a maximum bit rate of 400kbps. In both cases, the UBX and NMEA protocols are supported.
The timepulse signal is available over the TP pin. The external interrupt signal over the EIT can be used for time mark feature, time aiding, and wake-up from power save modes. The RST pin allows you to reset the GNSS module with a Low logic state. In addition to these pins, this Click board™ also has one digital I/O pin marked IO6, with the possibility of defining the purpose of this pin depending on the user's needs. It is only necessary to emphasize that when assigning a different function to an I/O, ensure that the default function is disabled where applicable.
This Click board™ can be operated only with a 3.3V logic voltage level. The board must perform appropriate logic voltage level conversion before using MCUs with different logic levels. Also, it comes equipped with a library containing functions and an example code that can be used as a reference for further development.
SPECIFICATIONS
Type GPS/GNSS Applications Can be used for the development of both acquisition and tracking devices and represents an ideal product for automotive, consumer, and industrial tracking applications On-board modules MIA-M10Q - standard precision GNSS module from u-blox Key Features Standard precision GNSS, supports GPS, GLONASS, Galileo, and BeiDou, four maximal concurrent GNSS, supports UART, and I2C interfaces, backup battery option, very low power consumption, high sensitivity, and more Interface I2C,UART ClickID Yes Compatibility mikroBUS™ Click board size S (28.6 x 25.4 mm) Input Voltage 3.3V
문서
연관제품
- 연관제품 1