라즈베리 파이 디버그 프로브
(Raspberry Pi Debug Probe)
개요
- 본 제품은 라즈베리 파이 디버그 프로브 입니다.
- 올인원 USB-Serial 디버그 및 UART 브릿지 모듈입니다.
- 라즈베리 파이 피코의 RP2040칩셋에 대해 gdb 및 OpenOCD 스텝/트레이싱 디버깅이 가능하게 하여 주는 제품입니다.
- printf 스타일의 디버깅을 위해 usb-serial 컨버터도 장착하고 있습니다.
- USB를 통해 UART 및 CMSIS-DAP 인터페이스를 지원합니다.
특징
- USB to two-wire serial debug
- Arm CMSIS-DAP Serial Wire Debug supported by default
- USB to UART bridge
- Works with OpenOCD
- Open source, easily upgradeable firmware
- USB power cable and three debug cables included
- 3.3V nominal I/O voltage
- Follows the Raspberry Pi 3-pin Debug Specification
-
The Raspberry Pi Debug Probe is an inexpensive, all-in-one USB to serial debug and UART bridge. It provides the necessary hardware and cabling to support "plug and play" debugging of Raspberry Pi Pico and other microcontroller and microprocessor-based platforms.
The Raspberry Pi Debug Probe provides both a processor serial debug interface (by default this is the ARM Serial Wire Debug interface) and an industry-standard UART interface. Both interfaces use a 3-pin debug connector, as specified in the Raspberry Pi 3-pin debug connector specification.
문서
연관제품
- 연관제품 1