라즈베리 파이용 오토메이션 HAT 미니 보드
(Pimoroni Automation HAT Mini)
개요
- 본 제품은 라즈베리 파이용 오토메이션 HAT 미니 보드입니다.
- 라즈베리(40핀 헤더를 가진 버전)와 결합하여 릴레이, 아날로그 채널, powered output, buffered input (모두 24V tolerant)를 사용할 수 있게 디자인된 보드입니다.
- 상태표시를 위한 0.96인치 LCD가 장착되어 있습니다.
- 산업용 제품과 연결하기 좋게 24V 장치들과 인터페이스가 가능합니다
특징
- 0.96" color LCD (160x80)
- 1 x 24V @ 2A relay (NC and NO terminals)
- 3 x 12-bit ADC @ 0-24V (ADS1015) (±2% accuracy)
- 3 x 24V tolerant buffered inputs
- 3 x 24V tolerant sinking outputs
- 3.5mm screw terminals
- Pimoroni breakout-compatible pin header
- Mini HAT-format board
- Fully-assembled (no soldering required)
- Compatible with all 40-pin header Raspberry Pi models
- Dimensions: 65mm x 30mm x 16.8mm
-
Use the buffered inputs to sense the on/off state of your devices, or get more granularity with the analog inputs that measure the input voltage with 12-bit accuracy. The sinking outputs can sink a total of 500mA across the three channels. For higher-current loads, you can use the relay that can tolerate up to 2A at 24V, and take advantage of the normally-open or normally-closed sides to give the correct failover state.
A female header is added on the underside of the board with the correct pinout for the Pimoroni breakout range. This opens up a whole host of nifty possibilities!
문서
연관제품
- 연관제품 1