아날로그 멀티플렉서 모듈 -TMUX1308
(ANALOG MUX 4 CLICK)
개요
- 본 제품은 아날로그 멀티플렉서 모듈 -TMUX1308 입니다.
- 여러 아날로그 입력중 하나를 하나의 디지털 출력으로 스위치하여 주는 제품으로 TMUX1308 8:1 멀티플렉서 칩을 기반으로 디자인되었습니다.
- 솔더 점퍼에 따라 3.3V/5V 시스템과 사용이 가능합니다.
특징
-
Analog MUX 4 Click as its foundation uses the TMUX1308, a general-purpose 8:1 single-ended CMOS analog multiplexer from Texas Instruments. The TMUX1308 multiplexer allows for multiple inputs/sensors to be monitored with a single AN pin of the mikroBUS™ socket supporting bidirectional analog and digital signals ranging from 0 to 5V. It has an internal injection current control eliminating the need for external diode and resistor networks to protect the switch, keeping the input signals within the supply voltage. The internal injection current control circuitry allows signals on disabled signal paths to exceed the supply voltage without affecting the signal of the enabled signal path.
Alongside internal injection current control, the TMUX1308 also has another protection feature, called Break-before-make delay, which represents a safety feature preventing two inputs from connecting when the device is switching. The output first breaks from the ON-state switch before connecting with the next ON-state switch. This time delay between the break and the make is known as the break-before-make delay.
This Click board™ communicates with MCU using several GPIO pins. It can be enabled or disabled through the EN pin routed to the CS pin of the mikroBUS™ socket; hence, offering a switch operation to turn ON/OFF power delivery to the TMUX1308. It also provides three address signals, labeled from A0 to A2 and routed to the PWM, INT, and RST pins of the mikroBUS™ socket, that control the switch configuration and determine the activation of the desired analog input channel based on their setup. Also, each analog input has a jumper for its hardware activation or deactivation and capacitors for additional filtering of the input channels.
This Click board™ can operate with both 3.3V and 5V logic voltage levels selected via the VCC SEL jumper. This way, it is allowed for both 3.3V and 5V capable MCUs to use the communication lines properly. However, the Click board™ comes equipped with a library containing easy-to-use functions and an example code that can be used, as a reference, for further development.
SPECIFICATIONS
Type Measurements,Port expander Applications Can be used for various applications, from industrial to instrumentation, consumer, communications, and more On-board modules TMUX1308 - general-purpose 8:1 single-ended CMOS analog multiplexer from Texas Instruments Key Features Injection current control, back-powering protection, bidirectional signal path, Break-Before-Make switching, VCC range signal handling, TTL/CMOS-logic compatible, pin-controllable, and more Interface Analog,GPIO Compatibility mikroBUS Click board size L (57.15 x 25.4 mm) Input Voltage 3.3V or 5V
문서
연관제품
- 연관제품 1