아두이노 블루투스 LE(BLE) 쉴드
(Adafruit Bluefruit LE Shield
- Bluetooth LE for Arduino)
개요
- 본 제품은 아두이노용 BLE 쉴드입니다.
- 아두이노와 하드웨어 SPI 인터페이스(MISO, MOSI, SCK), chip select 라인(D8), 인터럽트 라인(D7), 리셋(D4)를 통해 인터페이스 됩니다.
- AT 명령 세트를 이용하여 모듈의 동작을 제어할 수 있으며, GATT Services and Characteristics 도 정의하고 제어할 수 있습니다.
- 이뿐 아니라 AT명령을 이용하여 die 온도, 배터리 전압, RSSI, MAC 주소 등등을 체크할 수 있습니다.
- Bluefruit iOS App 이나 Android App을 이용, 폰을 컨트롤러로 사용하여 빠르게 프로젝트를 프로토타이핑 할 수 있습니다.
- 이외에도 아래와 같은 일을 할 수 있습니다.
- The Bluefruit can also act like an HID Keyboard (for devices that support BLE HID)
- Can become a BLE Heart Rate Monitor (a standard profile for BLE) - you just need to add the pulse-detection circuitry
- Turn it into a UriBeacon, the Google standard for Bluetooth LE beacons. Just power it and the 'Friend will bleep out a URL to any nearby devices with the UriBeacon app installed.
- Built in over-the-air bootloading capability so we can keep you updated with the hottest new firmware. Use any Android or iOS device to get updates and install them!
특징
- ARM Cortex M0 core running at 16MHz
- 256KB flash memory
- 32KB SRAM
- Transport: SPI at 4MHz with HW IRQ (5 pins required)
- 5V-safe inputs (Arduino Uno friendly, etc.)
- On-board 3.3V voltage regulation
- Bootloader with support for safe OTA firmware updates
- Easy AT command set to get up and running quickly
- Product Dimensions: 67.1mm x 51.7mm x 10.0mm / 2.6" x 2.0" x 0.4"
- Product Weight: 15.4g/0.5oz
문서
연관제품
- 연관제품 1