아두캠 0.3M 픽셀 카메라 모듈 -MT9V111
(Arducam 0.3 M pixel MT9V111 Camera Module)
개요
- Aptina® Imaging의 MT9V111은 1/4인치 VGA 포맷 CMOS active-pixel 디지탈 이미지 센서입니다.
- 649x489의 active imaging pixel array를 가지고 있어 VGA 해상도의 고품질 컬러 이미지를 캡쳐할 수 있습니다.
- 복잡한 카메라 함수를 칩안에 내장하였으며, 간단한 2선 시리얼 인터페이스로 프로그래밍이 가능합니다.
특징
- Optical size 1/4 inch
- Resolution 640×480 VGA
- Onboard regulator, only single 3.3V supply needed
- Standard 0.1inch (54mm) pin pitch header connector
- Mounted with high quality F1.8 / 6mm lens
- Ultra low-power, low cost CMOS image sensor Superior low-light performance
- Up to 30 fps progressive scan at 27 MHz for high quality video at VGA resolution
- On-chip Image Flow Processor (IFP) performs sophisticated processing: color recovery and correction, sharpening, gamma, lens shading correction, on-the-fly defect correction, 2X fixed zoom
- Image decimation to arbitrary size with smooth, continuous zoom and pan
- Automatic exposure, white balance and black compensation, flicker avoidance, color saturation, and defect identification and correction, auto frame rate, back light compensation
- Two-wire serial programming interface
- ITU_R BT.656 (YCbCr), YUV, 565RGB, 555RGB, and 444RGB output data formats
- Key Specifications
- Pin Definition
Pin No. PIN NAME TYPE DESCRIPTION 1 VCC POWER 3.3v Power supply 2 GND Ground Power ground 3 SCL Input Two-Wire Serial Interface Clock 4 SDATA Bi-directional Two-Wire Serial Interface Data I/O 5 VSYNC Output Active High: Frame Valid; indicates active frame 6 HSYNC Output Active High: Line/Data Valid; indicates active pixels 7 PCLK Output Pixel Clock output from sensor 8 XCLK Input Master Clock into Sensor 9 DOUT7 Output Pixel Data Output 7 (MSB) 10 DOUT6 Output Pixel Data Output 6 11 DOUT5 Output Pixel Data Output 5 12 DOUT4 Output Pixel Data Output 4 13 DOUT3 Output Pixel Data Output 3 14 DOUT2 Output Pixel Data Output 2 15 DOUT1 Output Pixel Data Output 1 16 DOUT0 Output Pixel Data Output 0 (LSB)
문서
-
ArduCAM provides a full demonstration for MT9V111 camera module on Arduino platform. Please download the ArduCAM_MT9V111_Camera_Playback.ino from github.
It will turn the ArduCAM into a real digital camera with capture and playback functions.
1. Preview the live video on LCD Screen.
2. Capture and buffer the image to FIFO when shutter pressed quickly.
3. Store the image to Micro SD/TF card with BMP format.
4. Playback the capture photos one by one when shutter button hold on for 3 seconds.
This program requires the latest ArduCAM library andRev.C+ ArduCAM shield and use Arduino IDE 1.5.2 compiler or above.
연관제품
- 연관제품 1