위모스 D1 mini V3.0 ESP8266 보드
(Wemos D1 Mini V3.0 -Nodemcu, MicroPython, Arduino)
개요
- 본 제품은 Wemos D1 Mini V3.0 보드입니다.
- 아두이노 및 nodemcu, microPython과 호환되며 microUSB를 보드상에 가지고 있어 쉽게 프로그래밍이 가능합니다.
- 11개의 디지털 입출력 핀과 한개의 아날로그 입력핀을 지원하며 3.3V 로직레벨에서 동작합니다.
특징
-
11 digital input/output pins, all pins have interrupt/pwm/I2C/one-wire supported(except D0)
-
1 analog input(3.2V max input)
-
a Micro USB connection
-
Compatible with Arduino
-
Compatible with nodemcu
-
Compatible with MicroPython
-
Microcontroller ESP-8266EX Operating Voltage 3.3V Digital I/O Pins 11 Analog Input Pins 1(Max input: 3.2V) Clock Speed 80MHz/160MHz Flash 4M bytes Length 34.2mm Width 25.6mm Weight 3g -
Pin
Pin Function ESP-8266 Pin TX TXD TXD RX RXD RXD A0 Analog input, max 3.3V input A0 D0 IO GPIO16 D1 IO, SCL GPIO5 D2 IO, SDA GPIO4 D3 IO, 10k Pull-up GPIO0 D4 IO, 10k Pull-up, BUILTIN_LED GPIO2 D5 IO, SCK GPIO14 D6 IO, MISO GPIO12 D7 IO, MOSI GPIO13 D8 IO, 10k Pull-down, SS GPIO15 G Ground GND 5V 5V - 3V3 3.3V 3.3V RST Reset RST -
All of the IO pins have interrupt/pwm/I2C/one-wire support except D0.All of the IO pins run at 3.3V.