인턱티브 근접 센서 - 5mm
(SN04-N Inductive Proximity Sensor - 5mm)
개요
- 본 제품은 금속성 물체를 검출할 수 있는 인덕티브 근접 센서입니다.
- 5mm 이내에서 금속성 물체가 근접하였는지 터치 없이 탐지하여 스위치처럼 디지털 출력 신호를 내보냅니다.
- 전원이 들어오면 LED가 켜지고 물체가 탐지되면 LED가 더 밝아 집니다.
- 알림: 탐지 거리는 물체의 모양과 접근 속도 등에 따라 변화합니다.
특징
-
Product Specifications
Sensor Properties
Detecting Distance Max 5 mm Sensor Type Proximity (Inductive) Sensor Output Switch Type Normally Open
Electrical Properties
Supply Voltage Min 6 V DC Supply Voltage Max 36 V DC Current Consumption Max 5 mA
Physical Properties
Cable Length 1 m Material ABS Plastic Operating Indicator Red LED IP Rating IP67 Operating Temperature Min -25 °C Operating Temperature Max 75 °C -
Connection
This sensor connects to any device with a Digital Input.This is how you connect the 3528 to a Phidget board that does not have 12V power such as the 1018, 1012, 1202, and 1203 using our 12VDC Power Supply:
- Connect the +12 wire from the Power Supply (that's the one with the white line) to the 3528 Brown wire.
- Connect the 3528 Black wire to a Digital Input on the 1018.
- Connect the Power supply Ground Wire and the 3528 Blue wire to the Digital Input Ground connector on the 1018.
Note:When the 3528 is connected to a 1012, it will behave as a Normally Close (NC) sensor instead of Normally Open (NO).
The 3528 can also be used with the 1144 - 12V Sensor Adapter if you want to connect to a device with an analog input without worrying about providing a 12V power supply.
For boards that have power input, if the supplied power is within 12-24VDC, the +V line can be connected to the terminal block, powering the sensor from the Phidget.