피더 M0 블루투스 LE 보드
(Adafruit Feather M0 Bluefruit LE)
개요
- 본 제품은 adafruit 사의 피더 M0 BLE 보드입니다.
- 이름이 의미하듯 깃털처럼 얇고 작은 보드로 아두이노 및 BLE, USB 및 배터리 충전 회로가 작은 보드에 결합된 제품입니다.
- 아두이노 제로와 같이 48Mhz에서 동작하는 ATSAMD21G18 ARM Cortex M0 프로세서를 탑재하고 있으며, 3.3V 로직으로 동작합니다.
- 이 프로세서는 256K Flash, 32K RAM 및 내장 USB 회로가 있어 별도의 FTDI 칩이 필요가 없습니다.
- 보드에는 3.7V 리튬폴리머 배터리 커넥터를 장착하였습니다.
- 블루투스는 nRF51822 칩셋을 탑재하였습니다.
- 제공되는 스마트폰 앱(iOS App or Android App, or write your own to communicate with the UART service.)을 이용하여 데이터를 주고 받을 수 있습니다.
특징
- MDBT Datasheet
- 51.2mm x 22.8mm x 8mm / 2" x 0.9" x 0.28"
- Weight: 5.7g
- Pinout Datasheet
문서
- Adafruit Feather M0 Bluefruit LE
- Using ATSAMD21 SERCOM for more SPI, I2C and Serial ports
- Proper Debugging of ATSAMD21 Processors
- AT command set, you have full control over how the device behaves, including the ability to define and manipulate your own GATT Services and Characteristics,
- You can do a lot more too!
- The Bluefruit can also act like an HID Keyboard (for devices that support BLE HID)
- Can become a BLE Heart Rate Monitor (a standard profile for BLE) - you just need to add the pulse-detection circuitry
- Turn it into a UriBeacon, the Google standard for Bluetooth LE beacons. Just power it and the 'Friend will bleep out a URL to any nearby devices with the UriBeacon app installed.
- Built in over-the-air bootloading capability so we can keep you updated with the hottest new firmware. Use any Android or iOS device to get updates and install them. This will update the native code on the BLE module, to add new wireless capabilities, not program the ATmega chip.
Comes fully assembled and tested, with a USB bootloader that lets you quickly use it with the Arduino IDE. We also toss in some header so you can solder it in and plug into a solderless breadboard. Lipoly battery and MicroUSB cable not included (but we do have lots of options in the shop if you'd like!)