파이배지 - CircuitPython, MakeCode, Arcade, Arduino
(Adafruit PyBadge for MakeCode Arcade, CircuitPython or Arduino)
개요
- 본 제품은 신용카드 크기의 보드로 CircuitPython, MakeCode, Arcade, Arduino를 실행할 수 있는 파이배지입니다.
- ATSAMD51 MCU를 탑재하고 있으며, 파일 공간으로 2MB QSPI 플래쉬를 추가하여 이미지, 폰트, 사운드 등을 저장할 수 있습니다.
- 보드전면에는 1.8인치 160x128 컬러 TFT 디스플레이(dimmable backlight)가 장착되어 있습니다.
- Fast DMA를 지원하여 화면에 그림을 그릴시 매우 빠릅니다.
- 8개의 버튼, 5개의 네오픽셀 LED, 피더호환 헤더, 외부 모듈 연결용 3개의 커넥터를 가지고 있습니다.
- 조도센서, 3축 가속도센서, 버저 스피커를 장착하고 있습니다.
- 리포배터리로 동작이 가능하며, on-off 스위치가 있습니다.
특징
-
Now, how to program it? Well you've got a lot of options!
- MakeCode Arcade is the easiest to start for making games, you can drag-and-drop blocks and load games over the disk-drive bootloader
- CircuitPython lets you draw graphics, play wave files and print out text in any fonts - all in Python! There's tons of sensor support as well.
- Arduino is low level, powerful, but a little more challenging. You can use Adafruit Arcada to interface with the hardware and it will abstract some of the nitty-gritty details like reading buttons for you.
Here's a list of everything you get
- ATSAMD51J19 @ 120MHz with 3.3V logic/power - 512KB of FLASH + 192KB of RAM
- 2 MB of SPI Flash for storing images, sounds, animations, whatever!
- 1.8" 160x128 Color TFT Display connected to its own SPI port
- 8 x Game/Control Buttons with nice silicone button tops (these feel great)
- 5 x NeoPixels for badge dazzle, or game score-keeping
- Triple-axis accelerometer (motion sensor)
- Light sensor, reverse-mount so that it points out the front
- Built in buzzer mini-speaker
- Mono Class-D speaker driver for 4-8 ohm speakers, up to 2 Watts
- LiPoly battery port with built in recharging capability
- USB port for battery charging, programming and debugging
- Two female header strips with Feather-compatible pinout so you can plug any FeatherWings in
- JST ports for NeoPixels, sensor input, and I2C (you can fit I2C Grove connectors in here)
- Reset button
- On-Off switch
문서
연관제품
- 연관제품 1