파이배지 LC 버전 -CircuitPython, MakeCode, Arduino
(Adafruit PyBadge LC - MakeCode Arcade,
CircuitPython or Arduino - Low Cost Version)
개요
- 본 제품은 신용카드 크기의 보드로 CircuitPython, MakeCode, Arcade, Arduino를 실행할 수 있는 파이배지 LC 버전입니다.
- ATSAMD51 MCU를 탑재하고 있으며, 파일 공간으로 2MB QSPI 플래쉬를 추가하여 이미지, 폰트, 사운드 등을 저장할 수 있습니다.
- 보드전면에는 1.8인치 160x128 컬러 TFT 디스플레이(dimmable backlight)가 장착되어 있습니다.
- Fast DMA를 지원하여 화면에 그림을 그릴시 매우 빠릅니다.
- 파이배지와 동일하지만 Low Cost 버전으로 피더 헤더, JST STEMMA 커넥터, LIS3DH 가속도센서, 스피커커넥터가 장착되어 있지 않습니다.
특징
-
Now, how to program it? Well you've got a lot of options!
- MakeCode Arcade is the easiest to start for making games, you can drag-and-drop blocks and load games over the disk-drive bootloader
- CircuitPython lets you draw graphics, play wave files and print out text in any fonts - all in Python! There's tons of sensor support as well.
- Arduino is low level, powerful, but a little more challenging. You can use Adafruit Arcada to interface with the hardware and it will abstract some of the nitty-gritty details like reading buttons for you.
Here's a list of everything you get
- ATSAMD51J19 @ 120MHz with 3.3V logic/power - 512KB of FLASH + 192KB of RAM
- 2 MB of SPI Flash for storing images, sounds, animations, whatever!
- 1.8" 160x128 Color TFT Display connected to its own SPI port
- 8 x Game/Control Buttons with nice silicone button tops (these feel great)
- 1 x NeoPixel for badge dazzle
- Light sensor, reverse-mount so that it points out the front
- Built in buzzer mini-speaker
- LiPoly battery port with built in recharging capability
- USB port for battery charging, programming and debugging
- Reset button
- On-Off switch
문서
연관제품
- 연관제품 1