4A 바이폴라 스텝 모터 드라이버 피젯
(4A Stepper Phidget)
개요
- 본 제품은 4A 바이폴라 스텝 모터 드라이버 피젯입니다.
- 바이폴라 스텝모터를 제어할 수 있습니다 (최대 4A)
- 알림: VINT Hub와 같이 사용 하는 제품입니다.
특징
- Control motor position, velocity, and acceleration of one stepper up to 4A
- Set the current limit and holding current separately to optimize power saving
- "Step mode" specifies a target position in 1/16th steps
- "Run mode" rotates continuously at a specified velocity
- Isolated VINT Port improves reliability and eliminates ground loops
- Polarity, Overcurrent, and Power Supply Protection
- Failsafe Protection can be enabled to turn off the device if your program becomes unresponsive
- Monitor Supply Voltage to diagnose power issues and manage battery-powered applications
- Built-in heatsink to protect against overheating
-
Product Specifications
Board Properties Controlled By VINT VINT Communication Speed Max 100 kbit/s Controller Properties Motor Type Bipolar Stepper Number of Motor Ports 1 Motor Position Resolution 1⁄16 Step (40-Bit Signed) Position Max ± 1E+15 1⁄16 steps Stepper Velocity Resolution 1 1⁄16 steps/sec Stepper Velocity Max 115000 1⁄16 steps/sec Stepper Acceleration Resolution 1 1⁄16 steps/sec² Stepper Acceleration Min 2 1⁄16 steps/sec² Stepper Acceleration Max 1E+07 1⁄16 steps/sec² Sampling Interval Min 100 ms/sample Sampling Interval Max 60 s/sample Electrical Properties Available Current per Coil Max 4 A Supply Voltage Min 10 V DC Supply Voltage Max 30 V DC Current Consumption Min (VINT Port) 200 μA Current Consumption Max (VINT Port) 2.5 mA Replacement Fuse 5A Slow Blow Blade Type, Regular or Micro Physical Properties Recommended Wire Size 16 - 26 AWG Operating Temperature Min -20 °C Operating Temperature Max 85 °C