4x 18650 배터리 홀더 및 충전 모듈 -USB
(4-Way 18650 Battery Holder)
개요
- 본 제품은 4x 18650 배터리 홀더 및 충전 모듈 -USB 입니다.
- 4개의 18650 배터리를 꼽을 수 있으며, micro USB/USB Type C 커넥터를 통해 충전이 가능합니다.
- 5개의 5V/2A 출력 포트, 5개의 3.3V/1A의 출력 포트, 한개의 5V USB 출력을 지원합니다.
- 과충전/과방전 보호기능이 있으며, DIP 스위치를 통해 HOLD와 NORMAL 모드로 동작모드 변경이 가능합니다.
- 노말 모드일시 전류가 낮으면 자동으로 셧다운 하며, 홀드 모드일시 과방전 보호기능이 작동전까지 셧다운을 하지 않습니다.
특징
- Output current: 5V/2A, maximum support 3A; 3.3V/1A
- Input: Micro and Type-c port input
- Output: USB output*1,
3.3V output port*5,
5V output port*5 - LED indicator (blinking means charging, stop blinking means fully charged)
문서
-
-
The button controls the module switch, lightly press it to turn it on, and long-press it for 3 seconds to turn it off. The DIP switch can switch between HOLD mode and NORMAL mode, LED1, LED2, LED3, and LED4 represent the current power. When charging, it will blink. It stops blinking when the battery is fully charged.
Note:
The maximum current is 3A (3A is not recommended), and the output of the current depends on the quality of the 18650 battery.
Pay attention to battery polarity when installing. The + and - are clearly marked on the board, and the wrong direction will burn the module.