수량을 선택해주세요.
4채널 WiFi 스마트폰 릴레이 -OLED, 4 온도센서포트
(TSTR04 - 4 Channel Outputs 4 Temperature Sensors WiFi
Smartphone Relay (Thermostats))
개요
- 본 제품은 4채널 WiFi 스마트폰 릴레이입니다.
- OLED 디스플레이와 4개의 DS18B20 온도센서를 연결할 수 있는 포트가 지원됩니다.
- WiFi 연결을 이용하여 스마트폰이나 컴퓨터에서 릴레이를 제어할 수 있습니다.
- 오토모드에서는 설정한 온도 값으로 릴레이가 on/off 되도록 설정하여 사용할 수 있습니다.
- 각 릴레이 채널은 10A까지 스위칭이 가능합니다.
- 릴레이모듈의 전원은 5VDC 이며, DC 잭은 2.1mm (center positive) 잭을 가지고 있습니다.
- 릴레이는 SPDT 타입니다.
특징
-
Note: DS18B20 sensor is not included. You need to buy it separately.
Note: You must need a overheat protection device to avoid the risk of fire if you use it in any heating system.
-
Smartphone APP
We also provide a FREE android/IOS App TSTR Bluetooth. You can control your device by your phone very easily.
Relay power rating
If the relay is used at a voltage or current exceeding this specification, the life of the contacts may be significantly shortened.A full datasheet for the relays used on the TSTR04 is here: G5LA datasheet
If you use DC Power ,the Input voltage should be DC5V.
First Step - Install the Driver
The TSTR04 module uses FT232RL USB to UART chip . Before using the TSTR04 you will need to download the FT232RL Driver.Connect the TSTR04 and windows will detect it and ask for the drivers. Point windows to the inf folder and it will install the driver.
The TSTR04 will now appear as a com port.
Commands
The TSTR04 operates with an easy to use command set as described in the table below.TOSR04-T Baud rate : 9600
Test program
To get the TSTR04 up and running in the minimum amount of time we have put together an example program to demonstrate the functionality of the module.
"19세 미만의 미성년자"는 출입을 금합니다!
