수량을 선택해주세요.
8채널 24비트 절연 ADC 모듈 -AD7124-8
(ISO ADC 6 CLICK)
개요
특징
-
HOW DOES IT WORK?
ISO ADC 6 Click is based on the AD7124-8, an 8-channel, low noise, low power, 24-bit, sigma-delta ADC, and the ADuM341E, a 5kVrms quad digital isolator, both from Analog Devices. The ADC incorporates a sigma-delta modulator, buffer, reference, gain stage, and on-chip digital filtering. It is intended to measure wide dynamic ranges, weigh scales, temperature measurement applications, and low-frequency signals. The ADC allows up to 16 configurations or channels consisting of analog inputs, reference inputs, or power supplies. All ADC channels are available over the A0-15 header, with a common GND, power supply, and a bridge power switch (PSW).
You can add an external reference over the REF+ and REF- pins. The internal reference has its output available over the REFOUT pin. The synchronization input is also available over the SNC pin. It allows synchronization of the digital filters and analog modulators when using several AD7124-8 devices. For this purpose, the internal clock is available over the CLK pin. Alternatively, the internal clock can be turned off, and this pin can provide an external clock, allowing simultaneous conversions.
The isolator isolates the ADC communication lines to the host MCU. It features low propagation delay, low dynamic power consumption, 100Mbps maximum guaranteed data rate, and more. The isolator is based on CMOS, a monolithic air core transformer technology, and iCoupler technology.
ISO ADC 6 Click uses a standard 4-wire SPI serial interface of the ADC to communicate with the host MCU over the isolator barrier. The isolator uses a high-frequency carrier to transmit data across the isolation barrier using iCoupler chip scale transformer coils separated by layers of polyimide isolation. The ADC can work in three power modes, which allows sampling in a range of 1.17sps up to 19200sps.
This Click board™ can be operated only with a 3.3V logic voltage level. The board must perform appropriate logic voltage level conversion before using MCUs with different logic levels. Also, it comes equipped with a library containing functions and an example code that can be used as a reference for further development.
SPECIFICATIONS
Type ADC Applications Can be used for the development of a wide variety of industrial measurements, data acquisition systems, monitoring functions, and more On-board modules AD7124-8 - 24-bit sigma-delta ADC from Analog Devices ADuM341E - 5kVrms quad digital isolator from Analog Devices Key Features Full SPI serial interface isolation, 8 ADC channels, wide output data rate, low RMS noise, three power modes, rail-to-rail analog inputs, diagnostic functions, crosspoint multiplexed analog inputs, 8 differential/15 pseudo differential inputs, programmable gain, and more Interface SPI ClickID Yes Compatibility mikroBUS™ Click board size L (57.15 x 25.4 mm) Input Voltage 3.3V,External
문서
연관제품
- 연관제품 1
