AVR 오실로스코프 클락: O-Clock
(WAVR Oscilloscope Clock : O-Clock)
개요
- 본 O-Clock은 X-Y 아날로그 오실로스코프를 아날로그 시계로 변신시켜 줍니다. (본 제품을 함수 생성기로 사용할 수 있습니다.)
- ATmega328, DS1307 RTC, AD7302 DAC 및 시간 정보가 지워지지 않게 배터리 셀을 지원합니다.
- 오실로스코프와 O-Clock은 BNC 커넥터를 통해 연결하거나 CH 1/2를 프로브와 연결하여 가능합니다.
- 시간 및 다른 설정은 보드상의 푸쉬 버튼을 통해 설정하거나 RS-232인터페이스를 통해 설정이 가능합니다.
- 0.1인치 피치 헤더는 ATmega의 UART를 접근할 수 있게 하여 FTDI Basic 모듈을 통하여 USB로 인터페이싱을 할 수 있습니다.
- GPS모듈이나 다른 외부 PPS 신호를 연결하여 외부 시간으로 사용할수 있습니다.
- 미리 프로그램된 펌웨어가 로드되어 있으며, 선택할 수 있는 37개의 디스플레이 조합이 있습니다.
- O-Clock을 터미널모드나 함수생성기 모드로도 사용이 가능합니다.
- 터미널 어플리케이션은 Asteroid와 같은 게임을 생성하고 디스플레이 하기위해 persistent vector graphics를 지원할수 있습니다.
- USB 혹은 8-15VDC(중심이 양극인 배럴 커넥터)를 통해 전원공급이 가능합니다.
- 알림: 전원 및 BNC 커넥터는 포함되어 있지 않습니다.
특징
-
New Features in Firmware V4:
- New on-screen menu
- Control burn-in protection frequency from 1-9 minutes
- Vector graphics mode for games like Asteroids
- Supports 250,000 baud value
- GPS mode remembers serial port speed setting
- Help screen
- Alarm clock
- New clock face
- LED shows time in Morse code
- Function generator 1 cycle faster
- Use the IOCTL command to select unusual options
- features:
- Connects to your X-Y analog oscilloscope via probes or BNC connectors.
- Two momentary push buttons to navigate through on-screen menu
- RS-232 interface (optional USB interface through serial header)
- 0.1" pitch header for external clock signal (GPS 1PPS, Rubidium Oscillator, etc.)
- 37 display combinations
- Display calibration mode
- Intensity control
- STK500v1 compatible bootloader
- On-board Real-Time Clock IC with 32.768kHz crystal and battery backup: this clock won't lose time!
- Optionally add a User Name to the Clock Display
- Automatic Time and Date setting when connected to the NMEA output from a GPS device (TTL level serial connection)
- Terminal and function generator modes
- Demo and Fun modes
- Automatic Daylight Saving Time correction for 2008-2014 for the USA and the EU
- Clean Reset of the EEProm Configuration Data option
문서
연관제품
- 연관제품 1